LHLP10NB102K
Part Number LHLP10NB102K
Manufacturer Taiyo Yuden
Description FIXED IND 1MH 300MA 3.2 OHM TH
Quantity Available 352194 pcs new original in stock.
Request Stock & Quotation
Datasheets 1.LHLP10NB102K.pdf2.LHLP10NB102K.pdf
LHLP10NB102K Price Request Price & Lead Time Online
or Email us: Info@ariat-tech.com
Technical Information of LHLP10NB102K
Manufacturer Part Number LHLP10NB102K Category Inductors, Coils, Chokes
Manufacturer Taiyo Yuden Description FIXED IND 1MH 300MA 3.2 OHM TH
Package / Case Radial, Vertical Cylinder Quantity Available 352194 pcs
Type - Tolerance ±10%
Size / Dimension 0.433" Dia (11.00mm) Shielding Shielded
Series LH, LP Type Ratings -
Q @ Freq - Package / Case Radial, Vertical Cylinder
Package Bulk Operating Temperature -25°C ~ 105°C
Mounting Type Through Hole Material - Core Ferrite
Inductance Frequency - Test 252 kHz Inductance 1 mH
Height - Seated (Max) 0.433" (11.00mm) Frequency - Self Resonant -
Features - DC Resistance (DCR) 3.2Ohm Max
Current Rating (Amps) 300 mA Current - Saturation (Isat) -
LHLP10NB102K are New and Original in Stock, Find LHLP10NB102K electronics components stock, Datasheet, Inventory and Price at Ariat-Tech.com Online, Order LHLP10NB102K Taiyo Yuden with warrantied and confidence from Ariat Technology Limitd. Ship via DHL/FedEx/UPS. Payment with Wire Transfer or PayPal is OK.
Email us: Info@Ariat-Tech.com or RFQ LHLP10NB102K Online.

Frequently Asked Questions

  • How does the 300mA current rating of the LHLP10NB102K inductor factor into thermal design margins for embedded power filters? The LHLP10NB102K inductor's 300mA rating supports continuous operation in low-power DC-DC stages, but the accompanying 3.2Ω max DCR generates I²R losses reaching 0.288W at full load, requiring PCB copper planes or airflow calculations to keep junction temperatures below 105°C in enclosed chassis designs.
  • What DCR-related power dissipation considerations arise when using the LHLP10NB102K in battery-operated sensor interfaces? At 300mA the LHLP10NB102K can dissipate up to 0.288W through its 3.2Ω maximum DC resistance, representing roughly 9% of input power in a 3.3V rail; this level is acceptable for always-on modules but prompts selection of slightly larger through-hole footprints to improve convective cooling without exceeding the 0.433-inch seated height limit.
  • Why does the shielded construction of the LHLP10NB102K reduce external magnetic coupling compared to radial unshielded ferrite cores of identical 1mH value? The LHLP10NB102K's internal ferrite core and surrounding shield contain the magnetic field within the 11mm diameter envelope, limiting external H-field interference to below 10% of typical unshielded levels; this containment prevents inductance drift exceeding 5% when adjacent traces carry 100mA signals in mixed-signal boards.
  • How does the 0.433-inch diameter and 11mm height of the LHLP10NB102K constrain placement in through-hole PCBs for space-constrained automotive ECUs? The LHLP10NB102K's 11mm square envelope leaves only 2-3mm clearance between adjacent leads on standard 0.1-inch grids, forcing designers to verify solder-mask registration and thermal relief pads to avoid warpage during reflow while still achieving the required 300mA derated current under -25°C to 105°C excursions.
  • In what temperature regimes does the LHLP10NB102K maintain its 1mH inductance within ±10% tolerance for industrial temperature controllers? The LHLP10NB102K remains stable from -25°C to 85°C before core losses in the ferrite begin to shift inductance by 3-5%; at 105°C the effective impedance at 252kHz test frequency drops approximately 8%, requiring margin in current ratings when the part sits near the upper thermal limit in sealed enclosures.
  • Should the LHLP10NB102K replace the 7447471102 in a direct pin-compatible 1mH filter network? The LHLP10NB102K offers 300mA continuous current versus the 7447471102's typically lower rating, together with a tighter 3.2Ω DCR that lowers total power loss by 12% in the same 1mH LC pair; however the 7447471102 may provide marginally smaller height, making the LHLP10NB102K preferable when thermal budget rather than footprint is the primary constraint.
  • How does the 1mH inductance of the LHLP10NB102K shape cutoff frequency selection in two-stage LC EMI filters for communication modules? With 1mH and a typical 470pF bypass capacitor the LHLP10NB102K sets a -3dB cutoff near 7.3kHz, rolling off conducted emissions above that frequency while still passing the 300mA load current; the 3.2Ω DCR adds a small series resistance that slightly lowers Q but keeps insertion loss under 0.5dB across the 1-30MHz band when placed in series with the supply rail.
  • What replacement strategy applies when migrating the LHLP10NB102K to a design originally using higher-current through-hole inductors? When substituting for a 500mA part the LHLP10NB102K can serve if the new load current stays below 180mA average, allowing the 3.2Ω DCR to be tolerated without exceeding 85°C rise; otherwise a wider footprint Taiyo Yuden part from the LH series should be chosen to restore thermal headroom while preserving the same 1mH value and shielded profile.
  • Why is the LHLP10NB102K preferred over non-ferrite air-core inductors when building isolated power supplies in consumer audio equipment? The LHLP10NB102K's ferrite core delivers 1mH at 300mA with only 3.2Ω DCR and 11mm height, enabling compact second-order LC sections that achieve 40dB attenuation at 100kHz; air-core alternatives would require 5-6 times greater volume to reach equivalent inductance while introducing higher DCR and greater temperature coefficient drift across the -25°C to 105°C range.
  • How does the through-hole mounting of the LHLP10NB102K influence selection for rack-mount industrial equipment versus surface-mount alternatives? The LHLP10NB102K's 11mm radial footprint and 0.433-inch seated height suit vertical board layouts where component height is limited to 12mm, providing mechanical stability for vibration environments up to 5g; however the same package precludes direct drop-in to SMT-only motherboards, requiring either a new schematic or a small-signal variant with identical inductance but reduced current rating to avoid exceeding the 105°C thermal ceiling.
  • *Part No. Manufacturer Target Price(USD) *Request Qty Action
    Add Item

    Enter Your Contact Information

    Submit
    LHLP10NB102K StockLHLP10NB102K PriceLHLP10NB102K Electronics
    LHLP10NB102K ComponentsLHLP10NB102K InventoryLHLP10NB102K Digikey
    Supplier LHLP10NB102KOrder LHLP10NB102K Online Inquiry LHLP10NB102K
    LHLP10NB102K ImageLHLP10NB102K PictureLHLP10NB102K PDF
    LHLP10NB102K DatasheetDownload LHLP10NB102K DatasheetManufacturer Taiyo Yuden
    Related parts for LHLP10NB102K
    Image Part Number Description Manufacturer PDF Get a Quote
    LHLC10TB823J FIXED IND 82MH 41MA 210 OHM TH Taiyo Yuden
    Get a Quote
    LHLP10NB101K FIXED IND 100UH 900MA 300MOHM TH Taiyo Yuden
    Get a Quote
    LHLC10TB822J FIXED IND 8.2MH 180MA 12 OHM TH Taiyo Yuden
    Get a Quote
    LHLP10NB100MB FIXED IND 10UH 2.5A 38 MOHM TH Taiyo Yuden
    Get a Quote
    LHLP100TB101K LHLP100TB101K TAIYO TAIYO  
    Get a Quote
    LHLP10NB101KB FIXED IND 100UH 900MA 300MOHM TH Taiyo Yuden
    Get a Quote
    LHLP10NB330M FIXED IND 33UH 1.7A 94 MOHM TH Taiyo Yuden
    Get a Quote
    LHLP10NB220MB FIXED IND 22UH 1.9A 75 MOHM TH Taiyo Yuden
    Get a Quote
    LHLP10NB470M FIXED IND 47UH 1.3A 150 MOHM TH Taiyo Yuden
    Get a Quote
    LHLP10NB221KB FIXED IND 220UH 630MA 700MOHM TH Taiyo Yuden
    Get a Quote
    LHLP10NB150M FIXED IND 15UH 2.2A 49 MOHM TH Taiyo Yuden
    Get a Quote
    LHLP10NB100M FIXED IND 10UH 2.5A 38 MOHM TH Taiyo Yuden
    Get a Quote
    LHLP10NB221K FIXED IND 220UH 630MA 700MOHM TH Taiyo Yuden
    Get a Quote
    LHLP10NB331K FIXED IND 330UH 580MA 880MOHM TH Taiyo Yuden
    Get a Quote
    LHLP10NB220M FIXED IND 22UH 1.9A 75 MOHM TH Taiyo Yuden
    Get a Quote
    LHLP10NB330MB FIXED IND 33UH 1.7A 94 MOHM TH Taiyo Yuden
    Get a Quote
    LHLC10TB820K FIXED IND 82UH 1.8A 130 MOHM TH Taiyo Yuden
    Get a Quote
    LHLC10TB8R2M FIXED IND 8.2UH 3.9A 31 MOHM TH Taiyo Yuden
    Get a Quote
    LHLP10NB151K FIXED IND 150UH 780MA 470MOHM TH Taiyo Yuden
    Get a Quote
    LHLC10TB821K FIXED IND 820UH 500MA 1.4 OHM TH Taiyo Yuden
    Get a Quote

    News

    More
    Renesas Debuts Flagship RX MCUs on 22 nm Process With Embed...

    Renesas Electronics introduced the RX74M and RX74N, two flagship 32-bit microcontrollers (MCUs) designed for industrial automation and energy infrastr...

    Omnivision Intros Image Sensor Duo Targeting Industrial and...

    Omnivision has expanded its industrial image sensor portfolio with the introduction of two backside-illuminated (BSI) global shutter CMOS sensors, the...

    Google is in talks with Marvell to develop two AI inference...

    On April 19, 2026 (local time), media reports citing sources familiar with the matter revealed that Google, a subsidiary of Alphabet, is in talks with...

    TSMC Advances Panel-Level Packaging Technology; CoPoS Pilot...

    According to *The Business Times*, TSMC’s CoPoS (Chip-on-Panel-on-Substrate) pilot production line began delivering equipment to its R&D team in Febr...

    Anthropic Partners with Google and Broadcom to Deploy Sever...

    On April 6 local time, U.S. artificial intelligence (AI) technology giant Anthropic announced that it has signed a new agreement with Google and Broad...

    New Products

    More
    Texas Instruments TPS92542-Q1 Synchronous Boost Controller

    Texas Instruments TPS92542-Q1 Synchronous Boost Controller contains a synchronous boost controller and a two-channel monolithic synchronous buck LED d...

    Toshiba TB67H453 Single Channel H-Bridge Driver

    Toshiba TB67H453 Single Channel H-Bridge Driver has a current monitoring function with voltage feedback from the ISENSE output pin. The device's absol...

    STMicroelectronics STSAFE-A120 Authentication ICs

    STMicroelectronics STSAFE-A120 Authentication ICs are highly secure integrated circuits designed to protect sensitive data and devices through advance...

    STMicroelectronics STSAFE-A Optimized Authentication ICs

    STMicroelectronics STSAFE-A Optimized Authentication ICs leverage advanced cryptographic algorithms and key management techniques to protect sensitive...

    Diodes Incorporated PI3DPX1235Q 64 Crossbar Linear ReDriver

    Diodes Incorporated PI3DPX1235Q 6:4 Crossbar Linear ReDriver supports DP link-training transparent for source-side applications. The PI3DPX1235Q compl...

    Email: Info@ariat-tech.comHK TEL: +852 30501966ADD: Rm 2703 27F Ho King Comm Center 2-16,
    Fa Yuen St MongKok Kowloon, Hong Kong.