ERJ-U14J5R6U
Part Number ERJ-U14J5R6U
Manufacturer Panasonic Electronic Components
Description RES 5.6 OHM 5% 1/2W 1210 SMD
Quantity Available 1443197 pcs new original in stock.
Request Stock & Quotation
Datasheets ERJ-U14J5R6U.pdf
ERJ-U14J5R6U Price Request Price & Lead Time Online
or Email us: Info@ariat-tech.com
Technical Information of ERJ-U14J5R6U
Manufacturer Part Number ERJ-U14J5R6U Category Resistors
Manufacturer Panasonic Description RES 5.6 OHM 5% 1/2W 1210 SMD
Package / Case 1210 Quantity Available 1443197 pcs
Tolerance ±5% Temperature Coefficient -100/ +600ppm/°C
Supplier Device Package 1210 Size / Dimension 0.126" L x 0.098" W (3.20mm x 2.50mm)
Series ERJ-U14 Resistance 5.6 Ohms
Ratings AEC-Q200 Power (Watts) 0.5W, 1/2W
Package / Case 1210 (3225 Metric) Package Tape & Reel (TR)
Operating Temperature -55°C ~ 155°C Number of Terminations 2
Height - Seated (Max) 0.028" (0.70mm) Features Anti-Sulfur, Automotive AEC-Q200
Failure Rate - Composition Thick Film
Base Product Number ERJ-U14  
ERJ-U14J5R6U are New and Original in Stock, Find ERJ-U14J5R6U electronics components stock, Datasheet, Inventory and Price at Ariat-Tech.com Online, Order ERJ-U14J5R6U Panasonic Electronic Components with warrantied and confidence from Ariat Technology Limitd. Ship via DHL/FedEx/UPS. Payment with Wire Transfer or PayPal is OK.
Email us: Info@Ariat-Tech.com or RFQ ERJ-U14J5R6U Online.

Frequently Asked Questions

  • What are the thermal characteristics of the ERJ-U14J5R6U resistor, and how does the -100/+600 ppm/°C temperature coefficient affect circuit design across automotive temperature ranges? The ERJ-U14J5R6U exhibits a temperature coefficient of -100 ppm/°C in the negative temperature range and +600 ppm/°C in the positive temperature range, which means resistance changes asymmetrically with temperature. Across the -55°C to 155°C automotive operating window, this creates a maximum resistance variation of approximately ±4.8% from 25°C nominal (0°C to 155°C produces roughly +0.48 Ω shift at 5.6 Ω base). For precision current-sensing circuits, voltage-divider networks, or load-balancing applications in automotive systems, this asymmetric drift must be accounted for during worst-case analysis, particularly in high-temperature regimes where the positive coefficient dominates. The ERJ-U14J5R6U's ±5% tolerance compounds this effect, making it unsuitable for tight analog control loops without thermal compensation; however, for switching circuits, gate-drive resistors, or load-dump protection networks operating across automotive temperature extremes, the ERJ-U14J5R6U remains acceptable because absolute accuracy matters less than controlled thermal behavior.
  • How does the 0.5W power rating of the ERJ-U14J5R6U translate into continuous current capacity, and what are the thermal management implications for automotive under-hood applications? The ERJ-U14J5R6U is rated for 0.5W continuous dissipation. At the nominal 5.6 Ω resistance value, this yields a maximum steady-state current of approximately 298 mA (I = √(P/R) = √(0.5/5.6) ≈ 0.298 A). In automotive under-hood environments where ambient temperatures reach 125°C or higher, the ERJ-U14J5R6U must operate at reduced power levels because the 0.5W rating typically assumes 25°C ambient with adequate PCB copper area and via density for heat dissipation. At 155°C case temperature (the upper operating limit), safe power dissipation may reduce to 60–70% of rated value depending on PCB thermal design. For current-sensing shunt applications where the ERJ-U14J5R6U carries continuous current, designers should calculate steady-state temperature rise (ΔT ≈ P × θJA, where θJA is junction-to-ambient thermal resistance) and verify the resulting junction temperature remains below 155°C. In high-current battery management systems or motor control circuits, multiple ERJ-U14J5R6U resistors in parallel may be necessary to distribute power dissipation and maintain thermal stability.
  • What specific design advantages does the anti-sulfur thick-film construction of the ERJ-U14J5R6U provide for automotive environments, and which failure modes does it mitigate? The ERJ-U14J5R6U employs anti-sulfur thick-film composition to resist hydrogen sulfide (H₂S) and other corrosive sulfur-bearing species common in automotive exhaust regions, industrial environments, and high-pollution zones. Unprotected thick-film resistors can experience open-circuit failures or drift when sulfur compounds diffuse into the resistive layer and form sulfides, particularly under elevated temperature and humidity conditions. The anti-sulfur treatment in the ERJ-U14J5R6U extends component lifetime in these harsh environments by up to 5–10× compared to standard thick-film resistors. For automotive under-hood, engine bay, or exhaust-adjacent applications where the ERJ-U14J5R6U encounters thermal cycling combined with chemical exposure, this feature directly reduces field failure rates and improves system reliability. Engine control units (ECUs), power distribution modules, and emission control circuits benefit measurably from anti-sulfur resistors like the ERJ-U14J5R6U because resistance drift or sudden open-circuit faults in critical signal paths can trigger limp-home modes or disable vehicle functionality.
  • How does AEC-Q200 qualification of the ERJ-U14J5R6U ensure component reliability in automotive circuits, and what does this rating certify? AEC-Q200 qualification certifies that the ERJ-U14J5R6U has passed rigorous automotive-grade reliability testing, including thermal cycling stress (-40°C to 125°C cycling), moisture resistance, mechanical shock, vibration endurance, and parametric drift characterization over component lifetime. This standard, maintained by the Automotive Electronics Council, ensures the ERJ-U14J5R6U meets failure-rate targets compatible with safety-critical automotive systems (typically FMEA severity ratings of 5 or lower). AEC-Q200 certification does not guarantee zero failures, but rather that the ERJ-U14J5R6U exhibits predictable, low failure rates within specified confidence intervals—typically <100 FITS (failures per 10⁹ device-hours) for passive components under rated-stress operation. For power distribution modules, battery management systems, and engine control circuits where the ERJ-U14J5R6U is used in series with high-side switches or in current-sensing networks, AEC-Q200 rating provides evidence of long-term stability and reduces field-failure investigation costs. Non-AEC-Q200 resistors may experience higher drift rates or unexpected open-circuit failures during warranty periods, creating recalls or field-service liabilities.
  • In what automotive circuit architectures is the 1210 (3225 metric) package size of the ERJ-U14J5R6U most suitable, and are there package-related thermal or mechanical constraints? The ERJ-U14J5R6U in 1210 (3.20 mm × 2.50 mm × 0.70 mm max height) package is optimized for mid-density automotive PCB layouts where space is moderately constrained but thermal management is achievable through standard PCB copper allocation. This package size is common in power distribution modules, gateway modules, and multiplex control units where resistor arrays, driver circuits, and current-sensing networks must coexist on a single board. The 1210 package dissipates heat more effectively than smaller 0805 or 0603 packages (due to larger surface area), making the ERJ-U14J5R6U suitable for 0.5W continuous dissipation in real-world under-hood conditions with adequate PCB design. However, in densely populated high-frequency switching circuits or automotive radar modules, where component-to-component coupling or EMI effects are concerns, the 1210 footprint may introduce parasitic inductance or require additional trace management. For space-constrained designs like compact backup-camera modules or sensor interface boards, smaller-package resistors (0603) with lower power ratings might be preferable, whereas for high-current battery disconnect switches or motor-drive shunts, the ERJ-U14J5R6U's 1210 package and 0.5W rating offer a practical balance.
  • How should the ERJ-U14J5R6U be applied in current-sensing circuits for battery management systems, and what are the accuracy and stability considerations? The ERJ-U14J5R6U is frequently used as a shunt resistor in series with battery packs or high-side gate-drive paths to measure charging/discharging current through analog voltage measurement (V = I × R). At 5.6 Ω nominal with ±5% tolerance, the ERJ-U14J5R6U can sense currents ranging from tens of milliamps (low-quiescent drain monitoring) up to 300 mA continuous (approaching 0.5W dissipation limit). For a typical 12V automotive battery management system, a 50 mA charging current produces a 280 mV voltage drop across the ERJ-U14J5R6U, which is measurable by 10-bit or 12-bit analog-to-digital converters with millivolt resolution. The ±5% manufacturing tolerance creates ±0.28 Ω uncertainty around the nominal 5.6 Ω value; designers must account for this in calibration routines or use external temperature and voltage compensation algorithms. The asymmetric temperature coefficient (-100/+600 ppm/°C) of the ERJ-U14J5R6U introduces additional drift in cold engine-start conditions (-40°C) versus steady-state hot-soak (125°C); systems requiring sub-5% current measurement accuracy must implement lookup tables or analog corrections within the battery management IC. For less critical current-monitoring applications (e.g., load-dump detection or fault-condition shunting), the ERJ-U14J5R6U provides acceptable performance without calibration.
  • What are the failure mechanisms and end-of-life characteristics of the ERJ-U14J5R6U, and how does automotive thermal cycling affect long-term reliability? The ERJ-U14J5R6U undergoes gradual resistance drift over vehicle lifetime due to thermal cycling, moisture ingress (mitigated by MSL 1 / unlimited moisture sensitivity rating), and internal metallization degradation. Thick-film resistors like the ERJ-U14J5R6U typically exhibit positive resistance drift with cumulative thermal cycling; after 500–1000 automotive thermal cycles (-40°C to 125°C), resistance may increase by 1–3% from nominal value. This drift accelerates in high-humidity regions or when the ERJ-U14J5R6U operates near its 155°C maximum rating. The anti-sulfur composition of the ERJ-U14J5R6U extends this drift timeline compared to standard thick-film resistors but does not eliminate it. Open-circuit failures are rare under normal operation but can occur if the ERJ-U14J5R6U experiences mechanical shock (assembly vibration, impact), solder-joint fatigue at the 1210 terminations, or thermal stress-induced cracking in the resistive film. For safety-critical circuits (airbag deployment sensing, stability control feedback), the ERJ-U14J5R6U should be specified in redundant configurations or periodically monitored; single-point failures in non-critical applications (LED current limiting, pullup/pulldown biasing) are generally acceptable given AEC-Q200 qualification.
  • Is the ERJ-U14J5R6U suitable for replacing or substituting standard consumer-grade resistors in automotive upgrades or retrofit applications? The ERJ-U14J5R6U should not be directly substituted for consumer-grade or industrial-grade thick-film resistors in existing automotive designs without circuit re-validation, even though package, resistance value, and power rating may nominally match. Consumer resistors (non-AEC-Q200) typically exhibit higher failure rates in thermal cycling, lower sulfur resistance, and wider manufacturing tolerances. However, retrofitting consumer-grade circuits with AEC-Q200-qualified ERJ-U14J5R6U resistors can improve reliability and longevity. The ERJ-U14J5R6U's -100/+600 ppm/°C temperature coefficient may differ from legacy components; if the original circuit relied on specific thermal compensation behavior, the ERJ-U14J5R6U may introduce unexpected drift that destabilizes analog control loops or precision measurements. For retrofit applications (e.g., upgrading engine bay wiring harness modules), validation should include thermal cycling testing and functional performance confirmation across the full -55°C to 155°C automotive range to ensure the ERJ-U14J5R6U performs identically or acceptably relative to the original part.
  • What is the practical difference between the ERJ-U14J5R6U's ±5% tolerance and tighter-tolerance resistors, and when should tighter tolerance be specified instead? The ERJ-U14J5R6U's ±5% tolerance means the actual resistance value at 25°C may range from 5.32 Ω to 5.88 Ω (nominal 5.6 Ω ± 0.28 Ω). For most automotive applications—current limiting, pullup/pulldown biasing, RF impedance matching in low-cost modules—this tolerance is acceptable and reduces component cost. However, in precision analog circuits (e.g., instrumentation amplifier gain networks, precision current sources), ±1% or ±0.1% tolerance resistors are required to maintain closed-loop accuracy. The ERJ-U14J5R6U is unsuitable for high-resolution data-acquisition front-ends or precision analog-to-digital converter reference networks where tolerance stack-up directly limits measurement resolution. For mid-range precision applications (±5% overall system tolerance target), designers often pair the ERJ-U14J5R6U with tighter-tolerance components in critical signal paths (e.g., feedback resistors in voltage regulators) while accepting ±5% performance in non-critical biasing or filtering. If a circuit design requires the ERJ-U14J5R6U's 5.6 Ω value but demands tighter tolerance, Panasonic manufactures ERJ-U14J5R6U-equivalent parts in ±1% grade; however, this substitution increases cost and may not provide practical benefit unless system-level accuracy analysis confirms the need.
  • How does the ERJ-U14J5R6U perform in high-frequency automotive circuits, such as CAN bus termination or antenna matching networks? The ERJ-U14J5R6U is a DC/low-frequency passive component optimized for linear resistive behavior up to several megahertz. In CAN bus termination applications (120 Ω typically specified, not the ERJ-U14J5R6U directly), resistors must exhibit flat impedance and minimal parasitic inductance to prevent signal reflections and data corruption. The 1210 package of the ERJ-U14J5R6U introduces parasitic series inductance (typically 0.3–0.8 nH) and shunt capacitance (0.2–0.5 pF), which causes impedance variation above 100 MHz; this is generally acceptable for automotive CAN (125 kbps to 1 Mbps) or LIN buses. For antenna matching or RF impedance networks (e.g., cellular module front-end), the ERJ-U14J5R6U would not be directly used because its thick-film construction and package parasitic effects limit performance above 500 MHz. However, in switching power supplies or motor-drive circuits where the ERJ-U14J5R6U functions as a gate-drive resistor or current-sense element, high-frequency operation (switching frequencies up to 200 kHz) is well within the ERJ-U14J5R6U's performance envelope; thermal effects and skin-effect current distribution are negligible at these frequencies. For automotive radar (77 GHz) or 5G connectivity modules, custom high-frequency resistors with optimized package design would replace the ERJ-U14J5R6U.
  • What soldering and assembly process considerations apply to the ERJ-U14J5R6U, and are there moisture or thermal-shock risks during manufacturing? The ERJ-U14J5R6U, rated at MSL 1 (Unlimited moisture sensitivity), does not require special dry-pack storage or baking prior to soldering, unlike higher MSL components. This significantly reduces supply-chain logistics and manufacturing handling costs. The 1210 package with 0.70 mm maximum height is compatible with standard reflow soldering (peak temperature 245–260°C for 10–30 seconds); the ERJ-U14J5R6U's thick-film construction and Panasonic's AEC-Q200 qualification ensure solder-joint reliability even under multiple reflow cycles (e.g., rework scenarios). Wave soldering is also acceptable for the ERJ-U14J5R6U, though less common in automotive PCB production. The primary assembly risk is thermal shock during rapid cooling after reflow; large temperature differentials can induce micro-cracking in the resistive film or solder joints if the ERJ-U14J5R6U is subjected to liquid quenching or high-speed air impingement. Standard manufacturing practices—gradual cooling to 50°C over 60–120 seconds—prevent this issue. For automotive production facilities already qualified for AEC-Q100 PCB assembly, the ERJ-U14J5R6U integrates without additional process qualification; however, incoming inspection for solder-joint integrity (visual, X-ray) should be applied in high-reliability circuits (safety modules, battery management systems).
  • Are there alternative 5.6 Ω resistor products (different manufacturers or packages) that could replace the ERJ-U14J5R6U, and what are the trade-offs? Alternative 5.6 Ω AEC-Q200 resistors include Vishay's CRCW1210 series, Yageo's thick-film automotive line, and Samsung's automotive resistor portfolios, all available in 1210 packages with similar power ratings and temperature coefficients. The key differentiation of the ERJ-U14J5R6U lies in Panasonic's anti-sulfur construction and established OEM supply chain in Japanese and European automotive production. Replacing the ERJ-U14J5R6U with a competitor's part requires verification of temperature coefficient matching (the ERJ-U14J5R6U's -100/+600 ppm/°C is slightly asymmetric; some competitors offer more symmetric profiles), tolerance confirmation, and thermal performance under board-design constraints. Smaller packages (0805 or 0603) at lower power ratings (0.1W or 0.25W) reduce PCB area but cannot sustain the ERJ-U14J5R6U's 0.5W continuous dissipation without temperature rise exceeding 155°C in under-hood environments; these would be unsuitable for high-current shunt applications. Larger packages (2010, 2512) or wirewound 5.6 Ω resistors offer better power handling and tighter tolerances (±0.5% available) but increase cost and PCB footprint. For low-volume or non-safety-critical applications, consumer-grade 5.6 Ω resistors (0.25 Ω price reductions) may be tempting but introduce field-failure risk; OEM automotive designs typically mandate AEC-Q200 qualification across all passive components for warranty consistency.
  • How does the ERJ-U14J5R6U perform under extreme electromagnetic interference (EMI) or electrostatic discharge (ESD) conditions in automotive environments? The ERJ-U14J5R6U, being a passive resistive element without semiconductor junctions, is inherently immune to latch-up, thermal runaway, or parametric degradation from ESD events; static discharge paths through the ERJ-U14J5R6U cause no permanent change in resistance or function. This passive immunity makes the ERJ-U14J5R6U ideal for current-limiting or protective networks in circuits vulnerable to ESD (sensor interfaces, connector pins, body-module CAN transceivers). Under strong electromagnetic fields (automotive switching power supplies, motor drivers, or high-powered transmitters), the ERJ-U14J5R6U remains functionally stable; however, the 1210 package's parasitic inductance (0.3–0.8 nH) can couple magnetic energy, inducing slight impedance variations or transient voltage spikes across the ERJ-U14J5R6U during rapid switching events. To minimize EMI effects, PCB layout should place the ERJ-U14J5R6U close to the signal source or load and minimize loop area in current paths. The ERJ-U14J5R6U itself does not require shielding or filtering for typical automotive EMI environments (ISO 16750-3 compliance); however, circuits using the ERJ-U14J5R6U as part of analog signal conditioning may benefit from ferrite beads or RC filters on sensitive input lines upstream of the resistor. Thermal effects from high-frequency EMI are negligible because resistive heating dominates dissipation, not inductive coupling.
  • What are the RoHS and environmental compliance implications of the ERJ-U14J5R6U, and does it affect supply-chain sourcing or regulatory documentation? The ERJ-U14J5R6U is RoHS3 compliant (EU Directive 2011/65/EU and amendments), meaning it contains no lead, mercury, cadmium, or restricted brominated/chlorinated flame retardants. This certification simplifies supply-chain management for European automotive OEMs and Tier-1 suppliers and eliminates the need for separate RoHS compliance documentation per unit. REACH compliance status (REACH Unaffected per Panasonic's filing) indicates the ERJ-U14J5R6U contains no Substances of Very High Concern (SVHCs) or requires no REACH Article 33 Candidate List notifications. For automotive manufacturers subject to California Prop 65 or environmental liability frameworks, the ERJ-U14J5R6U is categorized as low-risk for material disclosure or recycling documentation. The ECCN classification (EAR99) and HTSUS code (8533.21.0030) are standard for passive resistors; these affect tariff rates and export control for non-US sourcing but do not restrict the ERJ-U14J5R6U's use in civilian automotive applications. Sourcing the ERJ-U14J5R6U from Panasonic's authorized distributors ensures compliance certifications are current and traceable; gray-market or counterfeit ERJ-U14J5R6U resistors may lack proper environmental certification, creating regulatory and warranty exposure for OEMs.
  • *Part No. Manufacturer Target Price(USD) *Request Qty Action
    Add Item

    Enter Your Contact Information

    Submit
    ERJ-U14J5R6U StockERJ-U14J5R6U PriceERJ-U14J5R6U Electronics
    ERJ-U14J5R6U ComponentsERJ-U14J5R6U InventoryERJ-U14J5R6U Digikey
    Supplier ERJ-U14J5R6UOrder ERJ-U14J5R6U Online Inquiry ERJ-U14J5R6U
    ERJ-U14J5R6U ImageERJ-U14J5R6U PictureERJ-U14J5R6U PDF
    ERJ-U14J5R6U DatasheetDownload ERJ-U14J5R6U DatasheetManufacturer Panasonic
    Related parts for ERJ-U14J5R6U
    Image Part Number Description Manufacturer PDF Get a Quote
    ERJ-U14J620U RES 62 OHM 5% 1/2W 1210 SMD Panasonic Electronic Components
    Get a Quote
    ERJ-U14J623U RES 62K OHM 5% 1/2W 1210 SMD Panasonic Electronic Components
    Get a Quote
    ERJ-U14J513U RES 51K OHM 5% 1/2W 1210 SMD Panasonic Electronic Components
    Get a Quote
    ERJ-U14J621U RES 620 OHM 5% 1/2W 1210 SMD Panasonic Electronic Components
    Get a Quote
    ERJ-U14J625U RES 6.2 M OHM 5% 1/2W 1210 SMD Panasonic Electronic Components
    Get a Quote
    ERJ-U14J560U RES 56 OHM 5% 1/2W 1210 SMD Panasonic Electronic Components
    Get a Quote
    ERJ-U14J561U RES 560 OHM 5% 1/2W 1210 SMD Panasonic Electronic Components
    Get a Quote
    ERJ-U14J682U RES 6.8K OHM 5% 1/2W 1210 SMD Panasonic Electronic Components
    Get a Quote
    ERJ-U14J681U RES 680 OHM 5% 1/2W 1210 SMD Panasonic Electronic Components
    Get a Quote
    ERJ-U14J680U RES 68 OHM 5% 1/2W 1210 SMD Panasonic Electronic Components
    Get a Quote
    ERJ-U14J562U RES 5.6K OHM 5% 1/2W 1210 SMD Panasonic Electronic Components
    Get a Quote
    ERJ-U14J564U RES 560K OHM 5% 1/2W 1210 SMD Panasonic Electronic Components
    Get a Quote
    ERJ-U14J563U RES 56K OHM 5% 1/2W 1210 SMD Panasonic Electronic Components
    Get a Quote
    ERJ-U14J624U RES 620K OHM 5% 1/2W 1210 SMD Panasonic Electronic Components
    Get a Quote
    ERJ-U14J515U RES 5.1 M OHM 5% 1/2W 1210 SMD Panasonic Electronic Components
    Get a Quote
    ERJ-U14J565U RES 5.6 M OHM 5% 1/2W 1210 SMD Panasonic Electronic Components
    Get a Quote
    ERJ-U14J514U RES 510K OHM 5% 1/2W 1210 SMD Panasonic Electronic Components
    Get a Quote
    ERJ-U14J622U RES 6.2K OHM 5% 1/2W 1210 SMD Panasonic Electronic Components
    Get a Quote
    ERJ-U14J683U RES 68K OHM 5% 1/2W 1210 SMD Panasonic Electronic Components
    Get a Quote
    ERJ-U14J5R1U RES 5.1 OHM 5% 1/2W 1210 SMD Panasonic Electronic Components
    Get a Quote

    News

    More
    onsemi Unveils EliteSiC M4 SiC Platform

    onsemi has launched EliteSiC M4, its fourth-generation silicon carbide (SiC) platform based on a trench architecture designed to improve next-generati...

    Arm and STMicroelectronics Advance Physical AI Through Cort...

    Building on decades of Arm Cortex-M innovation, Arm and STMicroelectronics are working together to bring intelligence closer to where machines interac...

    Renesas Debuts Flagship RX MCUs on 22 nm Process With Embed...

    Renesas Electronics introduced the RX74M and RX74N, two flagship 32-bit microcontrollers (MCUs) designed for industrial automation and energy infrastr...

    Omnivision Intros Image Sensor Duo Targeting Industrial and...

    Omnivision has expanded its industrial image sensor portfolio with the introduction of two backside-illuminated (BSI) global shutter CMOS sensors, the...

    Google is in talks with Marvell to develop two AI inference...

    On April 19, 2026 (local time), media reports citing sources familiar with the matter revealed that Google, a subsidiary of Alphabet, is in talks with...

    New Products

    More
    Texas Instruments TPS92542-Q1 Synchronous Boost Controller

    Texas Instruments TPS92542-Q1 Synchronous Boost Controller contains a synchronous boost controller and a two-channel monolithic synchronous buck LED d...

    Toshiba TB67H453 Single Channel H-Bridge Driver

    Toshiba TB67H453 Single Channel H-Bridge Driver has a current monitoring function with voltage feedback from the ISENSE output pin. The device's absol...

    STMicroelectronics STSAFE-A120 Authentication ICs

    STMicroelectronics STSAFE-A120 Authentication ICs are highly secure integrated circuits designed to protect sensitive data and devices through advance...

    STMicroelectronics STSAFE-A Optimized Authentication ICs

    STMicroelectronics STSAFE-A Optimized Authentication ICs leverage advanced cryptographic algorithms and key management techniques to protect sensitive...

    Diodes Incorporated PI3DPX1235Q 64 Crossbar Linear ReDriver

    Diodes Incorporated PI3DPX1235Q 6:4 Crossbar Linear ReDriver supports DP link-training transparent for source-side applications. The PI3DPX1235Q compl...

    Email: Info@ariat-tech.comHK TEL: +852 30501966ADD: Rm 2703 27F Ho King Comm Center 2-16,
    Fa Yuen St MongKok Kowloon, Hong Kong.