TNPW08057K41BYEA
Part Number TNPW08057K41BYEA
Manufacturer Vishay Dale
Description RES 7.41K OHM 0.1% 1/8W 0805
Quantity Available 288753 pcs new original in stock.
Request Stock & Quotation
Datasheets 1.TNPW08057K41BYEA.pdf2.TNPW08057K41BYEA.pdf3.TNPW08057K41BYEA.pdf
TNPW08057K41BYEA Price Request Price & Lead Time Online
or Email us: Info@ariat-tech.com
Technical Information of TNPW08057K41BYEA
Manufacturer Part Number TNPW08057K41BYEA Category Resistors
Manufacturer Dale / Vishay Description RES 7.41K OHM 0.1% 1/8W 0805
Package / Case 0805 Quantity Available 288753 pcs
Tolerance ±0.1% Temperature Coefficient ±10ppm/°C
Supplier Device Package 0805 Size / Dimension 0.079" L x 0.049" W (2.00mm x 1.25mm)
Series TNPW e3 Resistance 7.41 kOhms
Ratings AEC-Q200 Power (Watts) 0.125W, 1/8W
Package / Case 0805 (2012 Metric) Package Tape & Reel (TR)
Operating Temperature -55°C ~ 155°C Number of Terminations 2
Height - Seated (Max) 0.022" (0.55mm) Features Anti-Sulfur, Automotive AEC-Q200, Moisture Resistant
Failure Rate - Composition Thin Film
Base Product Number TNPW0805  
TNPW08057K41BYEA are New and Original in Stock, Find TNPW08057K41BYEA electronics components stock, Datasheet, Inventory and Price at Ariat-Tech.com Online, Order TNPW08057K41BYEA Vishay Dale with warrantied and confidence from Ariat Technology Limitd. Ship via DHL/FedEx/UPS. Payment with Wire Transfer or PayPal is OK.
Email us: Info@Ariat-Tech.com or RFQ TNPW08057K41BYEA Online.

Frequently Asked Questions

  • How does the ±0.1% tolerance of the TNPW08057K41BYEA affect precision analog circuit design compared to standard ±1% resistors? The TNPW08057K41BYEA achieves ±0.1% tolerance through thin-film construction, which maintains tighter resistance stability than conventional carbon-film resistors. In precision applications such as instrumentation amplifier gain networks, transimpedance amplifier feedback paths, or precision current-sense circuits, this tolerance directly reduces calibration drift and measurement error without requiring post-assembly trimming. For a 7.41 kΩ resistor, ±0.1% tolerance means the actual resistance remains within ±7.41 Ω of the nominal value. This becomes critical in high-resolution data acquisition where gain accuracy must remain stable across production batches and operating temperature ranges.
  • What does the ±10ppm/°C temperature coefficient of the TNPW08057K41BYEA mean for long-term circuit stability in automotive environments? The TNPW08057K41BYEA exhibits a temperature coefficient of ±10ppm/°C, meaning its resistance changes approximately ±0.001% per degree Celsius. Across the automotive operating range (-40°C to 125°C, or extended to -55°C to 175°C for the component), this introduces a total resistance shift of roughly ±0.9% from cold to hot conditions. For analog filter networks, sensor interfaces, or precision bias circuits in engine control modules or infotainment systems, this predictable drift is substantially better than standard metal-film resistors (typically ±25ppm/°C to ±100ppm/°C). The low temperature coefficient allows designers to maintain signal-chain accuracy without additional temperature compensation in many automotive applications where the TNPW08057K41BYEA operates.
  • Why is the TNPW08057K41BYEA rated for 0.26W despite its 0805 package size, and how does this power rating influence thermal design? The TNPW08057K41BYEA's 0.26W rating reflects the thin-film resistor's thermal efficiency and the 0805 package geometry (2.00mm × 1.25mm). This power rating is substantially higher than typical 0805 carbon-film resistors (0.125W) because thin-film construction provides better thermal conductivity to the substrate and solder pads. When designing circuits with the TNPW08057K41BYEA, the maximum dissipation calculation (V²/R or I²×R) must remain below 0.26W to prevent thermal runaway. For instance, at maximum rated power, the resistor can safely dissipate approximately 44mW at 7.41 kΩ without exceeding temperature limits. In high-current sense networks or low-impedance feedback paths, designers must verify that the TNPW08057K41BYEA operates well below 0.26W to maintain the ±10ppm/°C temperature coefficient stability and preserve the ±0.1% tolerance throughout the component's lifetime.
  • Does the anti-sulfur coating on the TNPW08057K41BYEA provide protection in industrial or automotive environments with hydrogen sulfide exposure? The TNPW08057K41BYEA includes an anti-sulfur coating specifically engineered to resist corrosion from hydrogen sulfide (H₂S) and similar sulfur-bearing compounds found in industrial atmospheres, coal-fired power plants, or petrochemical environments. Standard thin-film resistors without this coating experience resistance drift and eventual failure when exposed to H₂S due to sulfidation of the resistive element and termination metallization. The anti-sulfur feature on the TNPW08057K41BYEA extends component life and maintains the ±0.1% tolerance specification in these harsh environments. For automotive applications, particularly in regions with high industrial pollution or near saltwater corrosion zones, the anti-sulfur treatment ensures reliability over the 10–15 year vehicle lifecycle without requiring additional environmental shielding or protective encapsulation.
  • How does the AEC-Q200 automotive qualification of the TNPW08057K41BYEA relate to mission-critical reliability in engine control and safety-critical circuits? The TNPW08057K41BYEA carries AEC-Q200 qualification, which certifies the resistor has undergone extensive automotive-grade reliability testing including thermal shock cycling, vibration stress, moisture resistance, and accelerated life testing at elevated temperatures. This qualification ensures the component meets automotive OEM requirements for non-safety-critical functions in engine management systems, transmission control modules, body electronics, and infotainment subsystems. However, AEC-Q200 does not extend to safety-critical circuits (airbag controllers, brake-by-wire, steering-by-wire) which typically require AEC-Q100 certification or higher. For designers selecting the TNPW08057K41BYEA in automotive applications, the AEC-Q200 status provides confidence in thermal cycling resilience and long-term performance stability, but circuit architects must apply additional redundancy, diagnostics, and failure detection for safety-critical signal paths.
  • What is the practical benefit of MSL-1 (Unlimited Moisture Sensitivity Level) on the TNPW08057K41BYEA for high-volume reflow soldering and storage? The TNPW08057K41BYEA carries MSL-1 rating, meaning the component has unlimited shelf life and does not require moisture bake-out before reflow soldering, even after extended storage in non-controlled environments. Unlike MSL-2 and MSL-3 components that absorb atmospheric moisture and risk delamination or internal corrosion during high-temperature reflow, the TNPW08057K41BYEA's moisture resistance eliminates supply-chain complexity and manufacturing risk. In contract manufacturing and high-volume automotive production, this MSL-1 characteristic reduces material handling procedures, eliminates moisture-induced failures, and simplifies inventory management. The moisture-resistant thin-film construction of the TNPW08057K41BYEA makes it especially suitable for applications where PCBs are exposed to humid environments before final assembly or where extended warehousing periods are unavoidable.
  • In what circuit topologies is the 7.41 kΩ resistance value of the TNPW08057K41BYEA particularly well-suited for precision analog design? The 7.41 kΩ value of the TNPW08057K41BYEA falls within the optimal impedance range for many precision analog circuits. In transimpedance amplifier designs for photodiode interfaces, 7.41 kΩ feedback resistance provides adequate transimpedance gain (converting photocurrent to voltage) while maintaining noise performance and bandwidth characteristics. In precision voltage dividers for sensor signal conditioning, the TNPW08057K41BYEA allows impedance levels that minimize op-amp input bias current effects and maintain acceptable loading on signal sources. For RC filter networks in automotive sensor signal chains, this value supports corner frequencies in the 2–20 kHz range with standard capacitor values. In Wheatstone bridge networks for strain gauge or pressure transducer interfaces, 7.41 kΩ represents a common ratiometric pair value. The TNPW08057K41BYEA's ±0.1% tolerance ensures these circuits maintain accurate gain, filter response, and bridge balance without trimming.
  • How does the TNPW08057K41BYEA compare to the RN732ATTD7411B50 in terms of tolerance, temperature stability, and application trade-offs? The TNPW08057K41BYEA and RN732ATTD7411B50 both serve precision 7.41 kΩ applications, but the comparison reveals design-choice implications. The RN732 series typically offers higher precision (±0.05% typical) and lower temperature coefficients (±5ppm/°C typical) compared to the TNPW08057K41BYEA's ±0.1% tolerance and ±10ppm/°C specification. However, the RN732 series generally operates at lower power ratings and may incur higher component cost. The TNPW08057K41BYEA provides the practical balance of ±0.1% tolerance, automotive-grade reliability (AEC-Q200), anti-sulfur coating, and 0.26W power handling in a standard 0805 package. For automotive applications requiring robustness against sulfurous atmospheres and wider thermal excursions, the TNPW08057K41BYEA is the preferred choice despite slightly relaxed tolerance and temperature coefficient specifications. For laboratory instrumentation or aerospace applications where ultimate precision takes priority over environmental ruggedness, the RN732 family may justify higher cost.
  • What design considerations apply when substituting standard 0805 carbon-film resistors with the TNPW08057K41BYEA in legacy circuit boards? Substituting the TNPW08057K41BYEA into designs previously using standard 0805 carbon-film resistors introduces both advantages and tradeoffs. The mechanical footprint (2.00mm × 1.25mm, height 0.55mm) matches the 0805 standard exactly, so PCB layout compatibility is preserved. However, the TNPW08057K41BYEA's significantly improved tolerance (±0.1% vs. ±5%), lower temperature coefficient (±10ppm/°C vs. ±100–500ppm/°C), and higher power rating (0.26W vs. 0.125W) may alter circuit behavior if the original design compensated for worst-case tolerance stack-up through component selection or calibration. In analog filters, precision bias networks, or gain-setting circuits, the TNPW08057K41BYEA may cause unexpected performance shifts if the legacy design was calibrated around typical carbon-film tolerance distribution. Designers should verify that improved tolerance does not introduce unexpected deviations in gain, filter response, or biasing before deploying the TNPW08057K41BYEA as a drop-in replacement.
  • Is the TNPW08057K41BYEA suitable for high-frequency (RF) or mixed-signal circuits, or are there frequency-dependent limitations? The TNPW08057K41BYEA is optimized for precision DC and low-frequency analog circuits rather than RF or high-frequency applications. The 0805 package introduces parasitic inductance and capacitance that become significant above approximately 100 MHz. In RF power amplifier bias networks, impedance matching circuits, or high-frequency filters, the TNPW08057K41BYEA's parasitic reactance will cause impedance deviations from the nominal 7.41 kΩ value. For mixed-signal circuits operating below 1 MHz (such as precision ADC reference networks, analog front-ends for automotive sensors, or audio-range signal conditioning), the TNPW08057K41BYEA operates within its intended performance envelope. Designers working with broadband or RF systems should select surface-mount resistor families specifically characterized for high-frequency applications, such as thick-film networks with deliberate frequency compensation or spiral-wound designs with minimized parasitic effects.
  • What failure modes or wear-out mechanisms are relevant to long-term reliability of the TNPW08057K41BYEA in automotive thermal cycling? The TNPW08057K41BYEA's AEC-Q200 qualification implies testing for thermal cycling-induced failure modes such as resistance drift, open-circuit due to solder joint fatigue, and internal element fracture. Thin-film resistors like the TNPW08057K41BYEA exhibit gradual resistance increase over extended thermal cycling (-55°C to 175°C) as the thin-film element experiences micro-cracking under cyclic thermal stress. The ±10ppm/°C temperature coefficient specification already accounts for this gradual drift within acceptable bounds throughout the automotive service life. However, designs that depend on absolute resistance values over 15+ years should incorporate periodic measurement or self-calibration loops rather than assuming zero drift. The TNPW08057K41BYEA's anti-sulfur coating and moisture-resistant construction mitigate environmental corrosion mechanisms that would otherwise accelerate wear, extending functional life well beyond 10 years in typical automotive underhood and interior environments.
  • How should the ±0.1% tolerance of the TNPW08057K41BYEA be factored into precision analog filter design, particularly for gain accuracy and cutoff frequency? In active analog filters using the TNPW08057K41BYEA for gain-setting or frequency-tuning resistors, the ±0.1% tolerance translates directly into corresponding errors in gain and cutoff frequency. For a non-inverting amplifier with gain G = 1 + (Rf/Rin), if both Rf and Rin are TNPW08057K41BYEA resistors, the tolerance errors partially cancel due to their correlated temperature and manufacturing variations, reducing effective gain error to approximately ±0.07% worst-case. However, in RC low-pass filters where cutoff frequency fc = 1/(2π×R×C), the TNPW08057K41BYEA's ±0.1% resistance tolerance causes ±0.1% cutoff frequency error if the capacitor is held constant. To achieve cutoff frequencies with tighter tolerances than ±0.1%, designers must either (1) use precision trimmer capacitors, (2) employ digital tuning with switched-capacitor or switched-resistor topologies, or (3) apply post-manufacturing calibration. The TNPW08057K41BYEA's low temperature coefficient (±10ppm/°C) ensures that cutoff frequency drift over the -55°C to 175°C operating range remains predictable and relatively small compared to its initial tolerance.
  • What is the expected lifespan and end-of-life behavior of the TNPW08057K41BYEA in continuous operation at maximum rated power and temperature? The TNPW08057K41BYEA is designed for typical automotive service life (10–15 years) under normal operating conditions. When operated continuously at maximum rated conditions (0.26W dissipation at 175°C ambient), the thin-film element experiences accelerated aging, manifesting as gradual resistance increase and eventual catastrophic failure (open circuit). Industry reliability models suggest a Mean Time to Failure (MTBF) of 100,000+ hours under rated conditions, though Vishay Dale typically publishes failure rate data separately. In practical automotive applications, the TNPW08057K41BYEA rarely operates at the thermal ceiling; transient power spikes and intermittent duty cycles extend functional life substantially. Designers concerned with ultra-long-life applications (20+ years) should derate the TNPW08057K41BYEA to approximately 50–70% of maximum rated power and ensure ambient temperatures remain below 125°C, which proportionally extends life and maintains the ±0.1% tolerance specification throughout the extended service window.
  • Are there specific layout or thermal management techniques that optimize the TNPW08057K41BYEA's performance in high-density analog circuits where thermal gradients exist? The TNPW08057K41BYEA's 0805 package size (2.00mm × 1.25mm) and 0.26W power handling create localized heat dissipation on the PCB substrate. In high-density analog circuits such as multi-channel sensor conditioning boards or integrated power management modules, thermal gradients between the TNPW08057K41BYEA and nearby precision op-amps or ADCs degrade overall system accuracy. Optimal layout practices include (1) grouping precision resistor networks (including the TNPW08057K41BYEA) away from high-power dissipation zones, (2) ensuring adequate copper area beneath and adjacent to the resistor for thermal spreading, (3) placing temperature-sensitive components (references, op-amps) in thermally controlled regions, and (4) routing substrate vias directly under the TNPW08057K41BYEA to enhance heat transfer to internal PCB layers. For applications where all resistor elements must operate at identical temperature, designers may implement thermal symmetry by mirroring TNPW08057K41BYEA placements or housing the entire network within a shielded thermal enclosure. These techniques preserve the ±10ppm/°C temperature stability specification across the circuit board.
  • How does ROHS3 compliance and REACH status of the TNPW08057K41BYEA affect supply-chain planning for EU-based manufacturing or aerospace applications? The TNPW08057K41BYEA carries ROHS3 compliance, confirming elimination of six restricted substances (lead, cadmium, mercury, hexavalent chromium, PBB, PBDE) within permitted thresholds. REACH status "Unaffected" indicates the component does not contain Substances of Very High Concern (SVHC) requiring special disclosure or authorization. For EU-based manufacturers and integrators, ROHS3 compliance enables direct procurement without supply-chain qualification delays. For aerospace and defense applications governed by AS9100 standards, ROHS3 and REACH status simplify certification workflows and reduce material documentation overhead. The TNPW08057K41BYEA's compliance status also provides design continuity; future regulatory tightening or substance restrictions are less likely to force redesign of boards already deployed with this component. However, designers transitioning from legacy lead-bearing resistors must account for differences in solder joint mechanical properties and reflow temperature profiles, which may require PCB design rule updates despite the TNPW08057K41BYEA's identical 0805 footprint.
  • *Part No. Manufacturer Target Price(USD) *Request Qty Action
    Add Item

    Enter Your Contact Information

    Submit
    TNPW08057K41BYEA StockTNPW08057K41BYEA PriceTNPW08057K41BYEA Electronics
    TNPW08057K41BYEA ComponentsTNPW08057K41BYEA InventoryTNPW08057K41BYEA Digikey
    Supplier TNPW08057K41BYEAOrder TNPW08057K41BYEA Online Inquiry TNPW08057K41BYEA
    TNPW08057K41BYEA ImageTNPW08057K41BYEA PictureTNPW08057K41BYEA PDF
    TNPW08057K41BYEA DatasheetDownload TNPW08057K41BYEA DatasheetManufacturer Dale / Vishay
    Related parts for TNPW08057K41BYEA
    Image Part Number Description Manufacturer PDF Get a Quote
    TNPW08057K50BHEA RES 7.5K OHM 0.1% 1/8W 0805 Vishay Dale
    Get a Quote
    TNPW08057K50BETY RES 7.5K OHM 0.1% 1/8W 0805 Vishay Dale
    Get a Quote
    TNPW08057K50BETA RES 7.5K OHM 0.1% 1/8W 0805 Vishay Dale
    Get a Quote
    TNPW08057K32BXEN RES 7.32K OHM 0.1% 1/8W 0805 Vishay Dale
    Get a Quote
    TNPW08057K32BETA RES 7.32K OHM 0.1% 1/8W 0805 Vishay Dale
    Get a Quote
    TNPW08057K50BEEA RES 7.5K OHM 0.1% 1/8W 0805 Vishay Dale
    Get a Quote
    TNPW08057K50BECN RES 7.5K OHM 0.1% 1/8W 0805 Vishay Dale
    Get a Quote
    TNPW08057K32BETY RES 7.32K OHM 0.1% 1/8W 0805 Vishay Dale
    Get a Quote
    TNPW08057K50BHTA RES 7.5K OHM 0.1% 1/8W 0805 Vishay Dale
    Get a Quote
    TNPW08057K32FHEA RES 7.32K OHM 1% 1/8W 0805 Vishay Dale
    Get a Quote
    TNPW08057K50BXTA RES 7.5K OHM 0.1% 1/8W 0805 Vishay Dale
    Get a Quote
    TNPW08057K41BEEA RES 7.41K OHM 0.1% 1/8W 0805 Vishay Dale
    Get a Quote
    TNPW08057K32BYEA RES 7.32K OHM 0.1% 1/8W 0805 Vishay Dale
    Get a Quote
    TNPW08057K50BXEN RES 7.5K OHM 0.1% 1/8W 0805 Vishay Dale
    Get a Quote
    TNPW08057K32DETA RES 7.32K OHM 0.5% 1/8W 0805 Vishay Dale
    Get a Quote
    TNPW08057K50BXCN RES 7.5K OHM 0.1% 1/8W 0805 Vishay Dale
    Get a Quote
    TNPW08057K41BETY RES 7.41K OHM 0.1% 1/8W 0805 Vishay Dale
    Get a Quote
    TNPW08057K32BEEN RES 7.32K OHM 0.1% 1/8W 0805 Vishay Dale
    Get a Quote
    TNPW08057K32BHEA RES 7.32K OHM 0.1% 1/8W 0805 Vishay Dale
    Get a Quote
    TNPW08057K50BEEN RES 7.5K OHM 0.1% 1/8W 0805 Vishay Dale
    Get a Quote

    News

    More
    Renesas Debuts Flagship RX MCUs on 22 nm Process With Embed...

    Renesas Electronics introduced the RX74M and RX74N, two flagship 32-bit microcontrollers (MCUs) designed for industrial automation and energy infrastr...

    Omnivision Intros Image Sensor Duo Targeting Industrial and...

    Omnivision has expanded its industrial image sensor portfolio with the introduction of two backside-illuminated (BSI) global shutter CMOS sensors, the...

    Google is in talks with Marvell to develop two AI inference...

    On April 19, 2026 (local time), media reports citing sources familiar with the matter revealed that Google, a subsidiary of Alphabet, is in talks with...

    TSMC Advances Panel-Level Packaging Technology; CoPoS Pilot...

    According to *The Business Times*, TSMC’s CoPoS (Chip-on-Panel-on-Substrate) pilot production line began delivering equipment to its R&D team in Febr...

    Anthropic Partners with Google and Broadcom to Deploy Sever...

    On April 6 local time, U.S. artificial intelligence (AI) technology giant Anthropic announced that it has signed a new agreement with Google and Broad...

    New Products

    More
    Texas Instruments TPS92542-Q1 Synchronous Boost Controller

    Texas Instruments TPS92542-Q1 Synchronous Boost Controller contains a synchronous boost controller and a two-channel monolithic synchronous buck LED d...

    Toshiba TB67H453 Single Channel H-Bridge Driver

    Toshiba TB67H453 Single Channel H-Bridge Driver has a current monitoring function with voltage feedback from the ISENSE output pin. The device's absol...

    STMicroelectronics STSAFE-A120 Authentication ICs

    STMicroelectronics STSAFE-A120 Authentication ICs are highly secure integrated circuits designed to protect sensitive data and devices through advance...

    STMicroelectronics STSAFE-A Optimized Authentication ICs

    STMicroelectronics STSAFE-A Optimized Authentication ICs leverage advanced cryptographic algorithms and key management techniques to protect sensitive...

    Diodes Incorporated PI3DPX1235Q 64 Crossbar Linear ReDriver

    Diodes Incorporated PI3DPX1235Q 6:4 Crossbar Linear ReDriver supports DP link-training transparent for source-side applications. The PI3DPX1235Q compl...

    Email: Info@ariat-tech.comHK TEL: +852 30501966ADD: Rm 2703 27F Ho King Comm Center 2-16,
    Fa Yuen St MongKok Kowloon, Hong Kong.