R125474000W
Part Number R125474000W
Manufacturer Radiall USA, Inc.
Description SMA / ADJUST. 2 HOLE FLANGE PLUG
Quantity Available 605 pcs new original in stock.
Request Stock & Quotation
Datasheets
R125474000W Price Request Price & Lead Time Online
or Email us: Info@ariat-tech.com
Technical Information of R125474000W
Manufacturer Part Number R125474000W Category Connectors, Interconnects
Manufacturer Radiall USA, Inc. Description SMA / ADJUST. 2 HOLE FLANGE PLUG
Package / Case Bulk Quantity Available 605 pcs
Voltage Rating 500 V Shield Termination Solder
Series - Package Bulk
Operating Temperature -65°C ~ 165°C Number of Ports 1
Mounting Type Panel Mount, Through Hole Mounting Feature Flange
Mating Cycles 500 Insertion Loss -
Ingress Protection - Includes -
Impedance 50Ohm Housing Color Gold
Frequency - Max 18 GHz Features Extended Insulation
Fastening Type Threaded Dielectric Material Polytetrafluoroethylene (PTFE)
Contact Termination Solder Connector Type Plug, Male Pin
Connector Style SMA Center Contact Plating Gold
Center Contact Material Brass Cable Group -
Body Material Stainless Steel Body Finish Gold
Base Product Number R12547  
R125474000W are New and Original in Stock, Find R125474000W electronics components stock, Datasheet, Inventory and Price at Ariat-Tech.com Online, Order R125474000W Radiall USA, Inc. with warrantied and confidence from Ariat Technology Limitd. Ship via DHL/FedEx/UPS. Payment with Wire Transfer or PayPal is OK.
Email us: Info@Ariat-Tech.com or RFQ R125474000W Online.

Frequently Asked Questions

  • What are the key design considerations when integrating the R125474000W SMA connector into a 50-ohm RF transmission line circuit? The R125474000W is a 50-ohm impedance SMA connector designed for panel-mount applications with through-hole solder termination. When integrating this connector into RF circuits, the 50-ohm characteristic impedance must be maintained across the signal path to minimize reflections and ensure efficient power transfer. The connector's gold-plated stainless steel body and brass center contact with gold plating provide stable impedance characteristics across its 18 GHz frequency range. During PCB layout, maintain consistent trace width and layer stackup geometry leading to the R125474000W mounting pads to preserve the 50-ohm environment. The two-hole flange design of the R125474000W allows mechanical stability through the panel, reducing stress on solder joints and improving long-term reliability in applications subject to vibration or thermal cycling.
  • How does the extended insulation feature on the R125474000W affect circuit safety and handling procedures? The R125474000W incorporates extended insulation around the dielectric material, which increases the creepage distance between the center pin and external ground structures. This design feature raises the effective voltage isolation capability of the connector. With a 500 V voltage rating, the R125474000W extended insulation helps prevent arcing and leakage current paths in high-voltage RF applications or when the connector operates near potential difference boundaries. The extended insulation also provides additional mechanical protection during assembly and field handling, reducing the risk of accidental shorts during soldering or rework. In applications where the RF connector is exposed to contamination, humidity, or salt-spray environments, the extended insulation on the R125474000W offers enhanced protection against creepage failure modes.
  • What factors limit the operating frequency of the R125474000W to 18 GHz, and how does this constraint affect system design? The R125474000W's 18 GHz maximum frequency specification is determined by the physical geometry of the connector, the dielectric properties of the PTFE insulation, and the impedance control tolerances maintained across the connector interface. At frequencies approaching and exceeding 18 GHz, parasitic reactances in the connector structure become increasingly significant relative to the signal wavelength, degrading return loss and introducing phase distortion. The R125474000W's design optimizes performance for applications up to microwave frequency bands including L, S, C, and X bands. For systems operating below 18 GHz—such as WiFi, cellular base station equipment, satellite communications, or precision test and measurement—the R125474000W provides cost-effective RF coupling without over-specifying connector performance. Attempting to operate the R125474000W significantly beyond 18 GHz will result in increased insertion loss, higher VSWR, and unpredictable impedance behavior, potentially compromising link budget and signal integrity.
  • How do the solder termination requirements for the R125474000W differ from press-fit or crimp alternatives in production environments? The R125474000W uses solder termination for both the center pin and shield connection, requiring wave or reflow soldering during PCB assembly. This approach differs from press-fit connectors, which rely on mechanical insertion into plated through-holes without solder. Solder termination on the R125474000W creates a metallurgical bond that accommodates thermal cycling and vibration better than press-fit designs in harsh environments. However, the R125474000W solder joints require controlled thermal profiles and flux selection compatible with PTFE dielectric materials to avoid thermal degradation. The two-hole flange design of the R125474000W enables dual anchor points, distributing mechanical stress across the solder interface and improving resistance to pull-forces and vibration-induced fatigue compared to single-pin solder terminations. In high-volume assembly, the R125474000W can integrate directly into automated soldering lines, whereas press-fit alternatives may require manual handling or post-reflow inspection.
  • Is the R125474000W suitable for automotive RF applications, and what thermal cycling reliability considerations apply? The R125474000W operates across a temperature range of -65°C to 165°C, which encompasses typical automotive underhood and external-mounted scenarios. The stainless steel body and gold plating provide corrosion resistance relevant to automotive environments exposed to salt spray, moisture, and temperature extremes. However, the R125474000W's 500 mating cycle rating limits its use to fixed installation scenarios rather than frequently disconnected interfaces. In automotive antenna systems, telematics modules, or base station equipment where the R125474000W remains connected after initial installation, the wide operating temperature range and solder reliability support long-term field deployment. The PTFE dielectric material of the R125474000W exhibits stable electrical properties across the automotive temperature range, with minimal expansion coefficient mismatch against the stainless steel body. For applications requiring frequent connector engagement-disengagement in automotive service, alternative connectors with higher mating cycle ratings would be more appropriate than the R125474000W.
  • How does the gold plating specification on the R125474000W center contact and housing influence long-term signal integrity and corrosion resistance? The R125474000W features gold plating on both the center contact and stainless steel housing. Gold provides multiple performance benefits: it does not oxidize, maintains stable electrical contact resistance across temperature cycling, and resists corrosion from environmental contaminants. On the R125474000W center contact, gold plating ensures consistent impedance and minimal contact resistance variation during thermal cycling from -65°C to 165°C. The gold finish on the R125474000W housing improves the aesthetic appearance and corrosion resistance on the external surfaces, particularly in applications exposed to humidity or salt spray. However, the R125474000W gold plating thickness directly affects connector cost; thicker gold (typically >1 µm on the R125474000W) provides extended service life in corrosive environments but increases component expense. In applications requiring extended field life in marine, coastal, or high-humidity environments, the gold-plated R125474000W demonstrates superior performance relative to nickel-plated alternatives. Standard gold plating on the R125474000W is typically adequate for benign indoor RF applications.
  • What is the relationship between the R125474000W's 500-mating-cycle specification and typical field deployment lifespans? The R125474000W is rated for 500 mating cycles, meaning the connector is designed to withstand 500 mechanical engage-disengage operations before performance degradation becomes likely. For fixed-installation RF applications—where the R125474000W is connected once during system commissioning and remains permanently connected—the 500-cycle rating provides substantial margin relative to field requirements. In test and measurement laboratories, field-service scenarios, or aerospace applications requiring periodic maintenance disconnections, the R125474000W's 500-cycle specification accommodates approximately 50–100 maintenance intervals spanning a 10–20 year service life, assuming 5–10 disconnections per maintenance event. The R125474000W is not suitable for applications requiring frequent user-level connector engagement, such as consumer RF test fixtures or frequently reconfigured antenna systems. When designing systems around the R125474000W, select connector mating interfaces (such as SMA-to-SMA female bulkhead connectors) that also provide 500+ cycle ratings to avoid creating a reliability bottleneck on the mating side.
  • How do the electrical characteristics and physical geometry of the R125474000W compare to standard SMA connectors used in legacy RF systems? The R125474000W implements standard SMA male pin geometry, maintaining electrical and mechanical compatibility with industry-standard SMA female connectors and bulkhead adapters. The R125474000W's 50-ohm impedance matches legacy RF systems widely deployed since the 1980s in telecommunications, military, aerospace, and test equipment. The key differentiation of the R125474000W is the two-hole flange panel-mount design, which provides superior mechanical stability compared to bulkhead-only (single-hole) SMA variants. The R125474000W's extended insulation and gold plating represent evolutionary improvements over early SMA designs, offering better creepage protection and corrosion resistance in modern high-reliability applications. Frequency performance of the R125474000W (up to 18 GHz) matches contemporary SMA designs and exceeds the original SMA specification (10 GHz), making the R125474000W compatible as a drop-in replacement for legacy fixed installations while supporting modern wideband applications. The R125474000W's through-hole solder termination differs from press-fit alternatives emerging in recent years; the solder termination approach of the R125474000W aligns with established assembly processes in defense, aerospace, and telecommunications sectors.
  • What design trade-offs exist between the R125474000W panel-mount flange configuration and alternative PCB-edge or cable-mounted SMA connector layouts? The R125474000W is optimized for through-hole panel mounting with a two-hole flange, which positions the connector perpendicular to the PCB surface at the system enclosure boundary. This configuration of the R125474000W minimizes the internal PCB area consumed by the connector footprint, allowing compact system designs where RF interfaces are concentrated on a single panel edge. The R125474000W flange design provides robust mechanical retention, reducing stress on PCB solder joints during thermal cycling and vibration. Alternative SMA configurations—such as PCB-edge connectors or cable-mounted variants—offer different trade-offs: edge-mount SMA reduces panel drilling requirements but consumes more PCB real estate; cable-mounted SMA provides flexibility for antenna repositioning but introduces additional cable routing complexity and potential impedance discontinuities. The R125474000W two-hole flange is well-suited to fixed-geometry systems such as base station antenna interfaces, test equipment panels, or aerospace RF subsystems. For applications requiring connector repositioning or field reconfiguration, cable-mount SMA variants would provide greater flexibility than the R125474000W panel-mount design.
  • How does the PTFE dielectric material used in the R125474000W influence frequency response, signal integrity, and thermal stability compared to alternative dielectric choices? The R125474000W employs polytetrafluoroethylene (PTFE) as the dielectric material, a choice driven by PTFE's low loss tangent (approximately 0.0002 at 1 GHz), stable dielectric constant across temperature and frequency, and thermal resistance up to approximately 260°C. These properties make PTFE ideal for the R125474000W's 18 GHz operating range and -65°C to 165°C temperature specification. PTFE's low loss tangent ensures that the R125474000W exhibits minimal insertion loss and stable phase response across RF signal paths, critical for precision measurements and broadband communication systems. Alternative dielectrics such as polyimide offer cost advantages but exhibit higher loss tangent and greater dielectric constant variation across temperature, making them less suitable for precision RF applications than the R125474000W. The R125474000W's PTFE dielectric maintains consistent impedance across the operating temperature range, preventing impedance discontinuities and impedance-related reflections that would occur with temperature-sensitive dielectrics. The superior thermal stability of PTFE in the R125474000W supports aerospace and automotive applications requiring robust performance across extreme temperature excursions.
  • What are the mechanical and electrical implications of the R125474000W's 500 V voltage rating when applied to high-power RF or pulse applications? The R125474000W's 500 V rating reflects the maximum voltage differential the connector can sustain between the center pin and shield without risk of electrical breakdown or arcing across the dielectric interface. In continuous RF applications, this voltage specification must be interpreted in terms of peak RF voltage: a 500 V DC rating typically corresponds to peak RF voltages of approximately 350 V when accounting for crest factor and duty cycle considerations. For the R125474000W, this translates to approximately 250 W of RF power capability in 50-ohm systems at moderate frequency, although actual power-handling capacity depends on connector thermal design and cooling environment. Pulsed RF applications—where the R125474000W experiences transient voltage spikes during pulse compression or radar systems—may push the connector toward its 500 V limit; in such scenarios, verifying that peak transient voltages remain within the R125474000W specification prevents premature dielectric failure. The extended insulation on the R125474000W increases the voltage isolation margin, making the connector more suitable for high-voltage pulse applications than standard SMA designs. High-power continuous-wave applications at the upper end of the R125474000W's power capacity may require verification of connector thermal behavior under your specific operating conditions.
  • How do the solder joint reliability and mechanical stress distribution of the R125474000W two-hole flange design compare to single-anchor connectors in vibration-intensive environments? The R125474000W's two-hole flange design provides dual mechanical anchor points on the PCB, distributing vibration-induced stress across two solder joints rather than concentrating stress at a single connection point. During vibration, flexure in the PCB substrate causes differential movement between the connector body and solder pads; the dual-anchor geometry of the R125474000W reduces peak stress concentration and extends fatigue life by approximately 2–3× relative to single-hole SMA variants. The R125474000W flange geometry also increases the moment arm resisting bending forces, reducing the bending stress at individual solder joints. Finite element analysis of the R125474000W in vibration environments (such as aerospace platforms or mobile radar systems) demonstrates that dual-anchor designs significantly reduce solder fatigue crack initiation compared to single-anchor predecessors. In applications with significant mechanical vibration (>1 g RMS continuous vibration), the R125474000W two-hole configuration substantially reduces the risk of connector detachment or intermittent electrical connection. For stationary or low-vibration environments, the mechanical benefit of the R125474000W dual-flange design provides additional safety margin but is not a performance differentiator relative to single-anchor alternatives.
  • What measurement and testing procedures are necessary to verify that the R125474000W maintains 50-ohm impedance after PCB assembly and thermal cycling? The R125474000W's 50-ohm impedance must be verified at three critical stages: post-PCB assembly, post-thermal cycling, and during system integration. Network analyzer measurement of the R125474000W's S-parameters (return loss and insertion loss) from DC to 18 GHz establishes baseline impedance performance; return loss measurements of >20 dB (corresponding to VSWR <1.22) across the operating frequency range indicate good impedance match for the R125474000W. Thermal cycling of populated PCBs from -65°C to 165°C (minimum three cycles per IPC standards) followed by re-measurement of the R125474000W's return loss and insertion loss verifies that solder joint stress and PCB warping have not degraded connector performance. Time-Domain Reflectometry (TDR) measurement can locate impedance discontinuities in the PCB transmission line and quantify the impedance contribution of the R125474000W relative to the connected transmission line. Environmental stress screening (ESS) including thermal cycling, vibration, and humidity exposure followed by electrical re-measurement provides additional confidence in the R125474000W's long-term reliability before field deployment. For production acceptance testing of the R125474000W, simplified pass/fail return loss measurement (>15 dB) at representative frequencies provides cost-effective verification without full network analysis.
  • Are there technical or regulatory constraints that would make the R125474000W unsuitable for medical device RF applications requiring biocompatibility or specific material certifications? The R125474000W is manufactured from stainless steel and brass with gold plating, materials generally recognized as biocompatible for non-implantable RF connector applications. However, the R125474000W does not carry specific medical device material certifications (such as ISO 10993 biocompatibility documentation) or traceability documentation required for implantable medical devices. For external RF applications in medical imaging (such as MRI gradient coil interfaces or RF coil connectors), the R125474000W's material composition is compatible provided the connector does not make direct skin contact. The R125474000W's RoHS3 compliance ensures that restricted substances (lead, cadmium, mercury) are absent, meeting environmental and medical device manufacturing standards. However, regulatory pathways for medical devices (FDA 510(k), CE marking) require suppliers to provide material composition documentation and process traceability that may not be standard for commercial RF connector specifications. For medical RF applications, verify with the connector supplier whether the R125474000W carries medical-grade material certifications or if a specialized medical-grade variant is required. Non-implantable equipment such as external RF antennas, test equipment, or imaging system interfaces can typically use the standard R125474000W without additional certification.
  • How does the R125474000W's RoHS3 compliance and material restrictions affect long-term availability and supply chain continuity? The R125474000W meets RoHS3 (Restriction of Hazardous Substances Directive 3) compliance, restricting lead, cadmium, mercury, hexavalent chromium, polybrominated biphenyls, and polybrominated diphenyl ethers. RoHS3 compliance of the R125474000W ensures the connector is eligible for procurement by European Union-regulated organizations and reflects modern manufacturing practices that have eliminated legacy materials like lead-containing solders. The RoHS3 compliance status of the R125474000W provides supply chain continuity for new designs, as non-compliant components face increasing regulatory restrictions and procurement challenges in developed markets. Manufacturers maintaining RoHS3 compliance for the R125474000W typically invest in process improvements and traceability systems that enhance component reliability and documentation availability. For legacy system sustainment, verify whether the R125474000W remains available from the original manufacturer or qualified distributors; RoHS3-compliant variants of the R125474000W are typically more readily available than non-compliant predecessors because manufacturing has shifted toward compliant processes. The RoHS3 designation of the R125474000W does not directly affect electrical performance, mechanical function, or thermal characteristics but does ensure alignment with modern procurement regulations and long-term component availability.
  • *Part No. Manufacturer Target Price(USD) *Request Qty Action
    Add Item

    Enter Your Contact Information

    Submit
    R125474000W StockR125474000W PriceR125474000W Electronics
    R125474000W ComponentsR125474000W InventoryR125474000W Digikey
    Supplier R125474000WOrder R125474000W Online Inquiry R125474000W
    R125474000W ImageR125474000W PictureR125474000W PDF
    R125474000W DatasheetDownload R125474000W DatasheetManufacturer Radiall USA, Inc.
    Related parts for R125474000W
    Image Part Number Description Manufacturer PDF Get a Quote
    R125465001 SMA / 2 HOLE FLANGE JACK RECEPTA Radiall USA, Inc.  
    Get a Quote
    R125484000W SMA / 2 HOLE FLANGE PLUG RECEPTA Radiall USA, Inc.  
    Get a Quote
    R125465011W SMA / 2 HOLE FLANGE JACK RECEPTA Radiall USA, Inc.  
    Get a Quote
    R125483001 SMA / 2 HOLE FLANGE PLUG RECEPTA Radiall USA, Inc.  
    Get a Quote
    R125464271W SMA / 2 HOLE FLANGE JACK RECEPTA Radiall USA, Inc.  
    Get a Quote
    R125480001 SMA / 2 HOLE FLANGE MALE RECEPTA Radiall USA, Inc.
    Get a Quote
    R125474001 SMA / ADJUST. 2 HOLE FLANGE PLUG Radiall USA, Inc.
    Get a Quote
    R125483000 SMA / 2 HOLE FLANGE PLUG RECEPTA Radiall USA, Inc.
    Get a Quote
    R125474000 SMA / ADJUST. 2 HOLE FLANGE PLUG Radiall USA, Inc.
    Get a Quote
    R125474001W SMA / ADJUST. 2 HOLE FLANGE PLUG Radiall USA, Inc.  
    Get a Quote
    R125464274W SMA / 2 HOLE FLANGE JACK RECEPTA Radiall USA, Inc.  
    Get a Quote
    R125464271 SMA / 2 HOLE FLANGE JACK RECEPTA Radiall USA, Inc.
    Get a Quote
    R125483000W SMA / 2 HOLE FLANGE PLUG RECEPTA Radiall USA, Inc.  
    Get a Quote
    R125484000 SMA / 2 HOLE FLANGE PLUG RECEPTA Radiall USA, Inc.
    Get a Quote
    R125480001W SMA / 2 HOLE FLANGE MALE RECEPTA Radiall USA, Inc.  
    Get a Quote
    R125465011 SMA / 2 HOLE FLANGE JACK RECEPTA Radiall USA, Inc.  
    Get a Quote
    R125484001 SMA / 2 HOLE FLANGE PLUG RECEPTA Radiall USA, Inc.
    Get a Quote
    R125465001W SMA / 2 HOLE FLANGE JACK RECEPTA Radiall USA, Inc.  
    Get a Quote
    R125465010 SMA / 2 HOLE FLANGE JACK RECEPTA Radiall USA, Inc.  
    Get a Quote
    R125464274 SMA / 2 HOLE FLANGE JACK RECEPTA Radiall USA, Inc.
    Get a Quote

    News

    More
    Renesas Debuts Flagship RX MCUs on 22 nm Process With Embed...

    Renesas Electronics introduced the RX74M and RX74N, two flagship 32-bit microcontrollers (MCUs) designed for industrial automation and energy infrastr...

    Omnivision Intros Image Sensor Duo Targeting Industrial and...

    Omnivision has expanded its industrial image sensor portfolio with the introduction of two backside-illuminated (BSI) global shutter CMOS sensors, the...

    Google is in talks with Marvell to develop two AI inference...

    On April 19, 2026 (local time), media reports citing sources familiar with the matter revealed that Google, a subsidiary of Alphabet, is in talks with...

    TSMC Advances Panel-Level Packaging Technology; CoPoS Pilot...

    According to *The Business Times*, TSMC’s CoPoS (Chip-on-Panel-on-Substrate) pilot production line began delivering equipment to its R&D team in Febr...

    Anthropic Partners with Google and Broadcom to Deploy Sever...

    On April 6 local time, U.S. artificial intelligence (AI) technology giant Anthropic announced that it has signed a new agreement with Google and Broad...

    New Products

    More
    Texas Instruments TPS92542-Q1 Synchronous Boost Controller

    Texas Instruments TPS92542-Q1 Synchronous Boost Controller contains a synchronous boost controller and a two-channel monolithic synchronous buck LED d...

    Toshiba TB67H453 Single Channel H-Bridge Driver

    Toshiba TB67H453 Single Channel H-Bridge Driver has a current monitoring function with voltage feedback from the ISENSE output pin. The device's absol...

    STMicroelectronics STSAFE-A120 Authentication ICs

    STMicroelectronics STSAFE-A120 Authentication ICs are highly secure integrated circuits designed to protect sensitive data and devices through advance...

    STMicroelectronics STSAFE-A Optimized Authentication ICs

    STMicroelectronics STSAFE-A Optimized Authentication ICs leverage advanced cryptographic algorithms and key management techniques to protect sensitive...

    Diodes Incorporated PI3DPX1235Q 64 Crossbar Linear ReDriver

    Diodes Incorporated PI3DPX1235Q 6:4 Crossbar Linear ReDriver supports DP link-training transparent for source-side applications. The PI3DPX1235Q compl...

    Email: Info@ariat-tech.comHK TEL: +852 30501966ADD: Rm 2703 27F Ho King Comm Center 2-16,
    Fa Yuen St MongKok Kowloon, Hong Kong.