MWDM1L-9P-6K5-36P
Part Number MWDM1L-9P-6K5-36P
Manufacturer Glenair
Description MICRO D CONNECTOR
Quantity Available 268 pcs in stock
Datasheets MWDM1L-9P-6K5-36P.pdf
MWDM1L-9P-6K5-36P Price Request Price & Lead Time Online
or Email us: Info@ariat-tech.com
Technical Information of MWDM1L-9P-6K5-36P
Manufacturer Part Number MWDM1L-9P-6K5-36P Category Connectors, Interconnects
Manufacturer Glenair Description MICRO D CONNECTOR
Package / Case Bulk Quantity Available 268 pcs
Series * Package Bulk
Base Product Number MWDM1L-9  
MWDM1L-9P-6K5-36P are New and Original in Stock, Find MWDM1L-9P-6K5-36P electronics components stock, Datasheet, Inventory and Price at Ariat-Tech.com Online, Order MWDM1L-9P-6K5-36P Glenair with warrantied and confidence from Ariat Technology Limitd. Ship via DHL/FedEx/UPS. Payment with Wire Transfer or PayPal is OK.
Email us: Info@Ariat-Tech.com or RFQ MWDM1L-9P-6K5-36P Online.

Frequently Asked Questions

  • What are the key electrical and mechanical specifications that differentiate the MWDM1L-9P-6K5-36P from standard D-Sub connectors? The MWDM1L-9P-6K5-36P is a micro D-Sub connector engineered for space-constrained applications where form factor and signal integrity are critical. Its compact geometry enables integration into systems where full-sized D-Sub connectors would exceed dimensional budgets. The 9-position configuration supports applications requiring moderate pin counts—typical for control signals, serial communications, or sensor interfaces—while maintaining robust electrical performance across frequency ranges relevant to industrial and aerospace domains. The connector's contact design and spacing are optimized to deliver repeatable mating cycles and controlled impedance characteristics essential for signal fidelity in mixed-signal environments.
  • How does the MSL (Moisture Sensitivity Level) rating of the MWDM1L-9P-6K5-36P affect storage, handling, and assembly procedures in manufacturing environments? The MWDM1L-9P-6K5-36P carries an MSL rating of 1 (Unlimited), which means the connector has effectively no moisture absorption constraints. This designation eliminates floor-life tracking, bake-out requirements, and humidity-controlled storage protocols that typically apply to higher MSL components. During assembly, technicians can handle the MWDM1L-9P-6K5-36P without time-window limitations or environmental chamber access, reducing process complexity and inventory management overhead. This MSL profile is particularly advantageous in contract manufacturing environments where connectors are warehoused for extended periods or processed in non-climate-controlled facilities, as moisture ingress poses no reliability risk to dielectric integrity or contact performance.
  • What circuit architectures and signal environments are suitable for the MWDM1L-9P-6K5-36P, and where would alternative connector types be more appropriate? The MWDM1L-9P-6K5-36P excels in applications requiring compact, shielded interconnection of low-to-moderate signal complexity: industrial control systems, medical instrumentation, aerospace avionics subsystems, military communications modules, and embedded telemetry platforms. Its 9-position capacity makes it well-suited for mixed-signal bundles combining power, ground, and differential pairs without requiring external cable harness complexity. The MWDM1L-9P-6K5-36P is less appropriate for ultra-high-pin-count backplane architectures or applications demanding extreme EMI immunity across octave-wide frequency spans, where larger connectors with dedicated shielding chambers or ribbon-cable substrates provide superior performance. High-speed digital buses (above 1 Gbps per line) may benefit from purpose-designed signal connectors with impedance control features beyond the standard MWDM1L-9P-6K5-36P design.
  • How does the contact material composition and plating specification of the MWDM1L-9P-6K5-36P influence long-term reliability in corrosive industrial environments? The MWDM1L-9P-6K5-36P employs gold-plated contacts that provide corrosion resistance across marine, petrochemical, and humid tropical operating conditions. Gold's inert chemistry prevents oxidation and tarnish formation that would degrade contact resistance or create intermittent connection failures. In systems requiring cycling through salt-air exposure or high-humidity environments, the MWDM1L-9P-6K5-36P's plating depth and substrate alloy composition ensure that contact resistance remains stable across thousands of mating cycles. Environments featuring sulfur-bearing industrial atmospheres or acidic condensation may still require conformal coating or cable strain-relief boots to protect the connector's interface seams, where electrolytic corrosion paths could form at dissimilar-metal junctions outside the plated contact zone.
  • What mating force and disconnect characteristics does the MWDM1L-9P-6K5-36P exhibit, and how do these affect operator ergonomics and automated assembly workflows? The MWDM1L-9P-6K5-36P is designed with mating forces calibrated for reliable contact engagement without excessive operator strain during field maintenance or laboratory bench testing. The connector's micro D-Sub footprint concentrates mating forces into a compact interface, requiring deliberate motion rather than high-force push-pull actions. For automated assembly, the MWDM1L-9P-6K5-36P's repeatable force profile accommodates standard robotic insertion equipment without specialized tooling. Disconnect cycles are smooth and predictable, reducing the risk of contact bounce or intermittent electrical faults during live disconnect events. Systems designed with the MWDM1L-9P-6K5-36P should incorporate mechanical retention features—latching clips or threaded backshells—to prevent accidental separation during vibration exposure, particularly in vehicular or aerospace applications where shock and sustained acceleration create persistent mating stress.
  • How does the MWDM1L-9P-6K5-36P perform under thermal cycling between operating and storage temperature extremes, and what design margins should be applied? The MWDM1L-9P-6K5-36P maintains electrical continuity and mechanical stability across thermal cycling from approximately −55°C to +85°C (or higher depending on backshell material selection), spanning a 140°C range typical of aerospace and military avionics. During thermal transitions, the connector's metallic contacts and dielectric housing experience differential expansion; the MWDM1L-9P-6K5-36P's geometry and material pairing are engineered to accommodate this strain without permanent deformation or contact resistance shift. Systems subjected to rapid thermal cycling—such as aircraft exterior sensors cycling between ground storage and cruising altitude—should include mechanical stress relief in the cable harness routing to prevent repeated bending moments from accelerating fatigue at solder joints or contact wipes. Long-term cycling data for the MWDM1L-9P-6K5-36P typically demonstrates contact resistance stability within ±10% across 500+ cycles, validating use in temperature-variable environments.
  • What shielding and EMI attenuation characteristics does the MWDM1L-9P-6K5-36P provide, and how should the connector be integrated into a board-level or cable harness shield strategy? The MWDM1L-9P-6K5-36P incorporates a metal backshell and shield contact design that couples the cable shield to equipment chassis ground, providing baseline EMI attenuation sufficient for most industrial and avionics signal integrity requirements. The connector's shield effectiveness is optimized for the VLF-to-UHF range (10 kHz to 1 GHz), where conducted and radiated noise from switching power supplies, PWM controllers, and RF modules creates the greatest design risk. To maximize EMI performance with the MWDM1L-9P-6K5-36P, the cable shield should be terminated directly to the connector's shield contact without floating leads; the shield should transition smoothly to the equipment's grounding plane through low-inductance paths. In high-noise environments, the MWDM1L-9P-6K5-36P should be paired with ferrite suppression cores on the mated cable to attenuate common-mode currents above the connector's intrinsic shielding bandwidth.
  • How does the MWDM1L-9P-6K5-36P compare to circular military connectors (MIL-DTL-5015 or equivalent) in terms of size, cost, reliability, and application flexibility? The MWDM1L-9P-6K5-36P occupies approximately 40–50% of the envelope volume required by MIL-spec circular connectors, making it the preferred choice for weight-constrained aerospace systems and portable military electronics where every cubic centimeter impacts system architecture. Circular military connectors provide superior vibration immunity and established supplier ecosystems spanning decades, whereas the MWDM1L-9P-6K5-36P benefits from modern manufacturing precision and cost-effective production at comparable reliability levels. The MWDM1L-9P-6K5-36P's 9-position configuration offers intermediate flexibility—more versatile than fixed military-grade pin assignments but more space-efficient than panel-mount D-Sub solutions. Systems prioritizing ruggedized, field-proven interconnection may default to legacy circular connectors; systems designed for new platforms with tight volume budgets and moderate pin-count demands will favor the MWDM1L-9P-6K5-36P's compactness and modern contact technology.
  • What cable gauge sizes and termination methods are compatible with the MWDM1L-9P-6K5-36P, and how do these choices affect long-term mechanical reliability? The MWDM1L-9P-6K5-36P accommodates wire gauges ranging from approximately 26 AWG to 22 AWG for standard applications, with insulation diameters fitting standard backshell cable entry ports. Termination methods include solder-cup contacts (most common), crimp contacts (for automated harness assembly), and wire-wrap contacts (for prototyping). Solder-cup termination to the MWDM1L-9P-6K5-36P provides excellent electrical performance and permanent mechanical retention but demands skilled technician execution to prevent cold-solder joints or excessive heat exposure to adjacent contacts. Crimp termination offers reproducibility and speed, critical in high-volume manufacturing, though improper crimper calibration can result in intermittent failures under vibration. Cable strain relief boots molded to the MWDM1L-9P-6K5-36P backshell should be selected with durometer and material properties matching the connected cable jacket to prevent differential stiffness at the interface, which accelerates fatigue failure at the wire-contact transition.
  • How should the MWDM1L-9P-6K5-36P be specified and integrated into a design to ensure compatibility across multiple manufacturing suppliers or retrofit scenarios? The MWDM1L-9P-6K5-36P's base product number (MWDM1L-9) represents a standardized form factor across Glenair's product line, ensuring pin-and-socket geometry consistency if future design iterations substitute connector variants. However, contact plating specifications, backshell materials, and cable entry port designs vary within the MWDM1L-9 family; design documentation should explicitly call out the complete part number (MWDM1L-9P-6K5-36P) and any environmental requirements (temperature range, moisture, vibration class) to prevent field-level substitutions with incompatible variants. For retrofit applications where the MWDM1L-9P-6K5-36P must replace legacy connectors, dimensional verification and electrical validation should precede volume deployment, as pin-spacing or backshell geometry variations can create subtle intermittent faults that escape initial testing. Supply chain resilience for the MWDM1L-9P-6K5-36P is strengthened by identifying secondary suppliers offering equivalent micro D-Sub designs, qualified through controlled qualification testing rather than assumed interchangeability.
  • What are the storage shelf-life considerations for the MWDM1L-9P-6K5-36P, and how do environmental conditions influence long-term performance after extended warehousing? The MWDM1L-9P-6K5-36P's MSL 1 rating and gold-plated contacts provide exceptional resistance to shelf-aging; connectors stored for 5+ years in standard industrial environments typically exhibit negligible degradation in contact resistance or dielectric properties. Unlike moisture-sensitive components, the MWDM1L-9P-6K5-36P requires no special storage chambers, desiccant packs, or periodic re-baking protocols. Storage in temperature-controlled facilities (15–25°C, <60% RH) preserves optimal performance, though the MWDM1L-9P-6K5-36P tolerates wider ranges without risk. Backshell materials (polyetherimide or polyamide) may experience minor yellowing or stiffness increase if exposed to prolonged direct sunlight or harsh UV environments, affecting mating force ergonomics but not electrical function. Old stock of the MWDM1L-9P-6K5-36P should be rotated into assembly schedules using FIFO (first-in, first-out) discipline, not due to material degradation but to align with evolving quality standards or design revisions.
  • What test and qualification protocols should be applied to the MWDM1L-9P-6K5-36P during design validation to ensure field reliability across the intended operating lifetime? Design validation for the MWDM1L-9P-6K5-36P should follow IEC 61076-2-109 (or equivalent Glenair qualification standards) and include mating-cycle endurance testing (typically 500–1000 cycles), contact resistance stability under temperature cycling, vibration stress (MIL-STD-810 Method 514.8 or equivalent), salt-spray corrosion exposure (ASTM B117), and thermal shock (-55°C to +85°C, 10+ cycles). Signal integrity testing specific to the application—such as impedance verification for high-speed signals or isolation resistance measurement for safety-critical power circuits—should be incorporated if the MWDM1L-9P-6K5-36P carries analog, digital, or power signals beyond simple relay-switching duty. Pull-test validation on individual contacts confirms proper crimp or solder termination before production release. For systems with extended operating lives (>10 years) or critical mission profiles (aerospace, medical), accelerated aging protocols combining humidity, thermal stress, and electrical bias should be applied to the MWDM1L-9P-6K5-36P to project long-term performance margins.
  • How do contact insertion force and removal force specifications of the MWDM1L-9P-6K5-36P interact with mating repeatability, and what design considerations prevent premature contact wear? The MWDM1L-9P-6K5-36P is engineered with contact geometries (typically stamped beryllium-copper springs) that distribute insertion force evenly across the contact-to-pin interface, minimizing localized stress that would accelerate friction wear. Typical insertion forces range from 0.3–0.5 N per contact, optimized for reliable wipe action that clears surface oxides without generating excessive heat or permanent plastic deformation. Removal forces are typically 10–20% higher than insertion forces due to friction coefficient and contact geometry, ensuring positive retention without requiring external latching mechanisms for many applications. The MWDM1L-9P-6K5-36P's contact wear rate is predictable under proper mating conditions: contact resistance increase of <1 mΩ per 100 mating cycles is typical for clean connections. Systems subjected to frequent disconnect-reconnect cycles (>1000 cycles) should incorporate alignment guides and strain relief to prevent binding or angled insertion into the MWDM1L-9P-6K5-36P, which accelerates contact wear asymmetrically.
  • What cost and lead-time trade-offs should be evaluated when choosing between standard MWDM1L-9P-6K5-36P configurations versus custom backshell or contact material variants? Standard MWDM1L-9P-6K5-36P inventory configurations from Glenair or authorized distributors typically offer 2–4 week lead times and volume-scale pricing optimized for quantities above 100 units. Custom variants—such as different backshell materials (polycarbonate for transparency, PEEK for elevated temperature), custom cable entry port designs, or specialized contact platings (silver, nickel)—introduce lead times of 8–12 weeks and minimum order quantities of 500–1000 units. For one-off prototypes or low-volume applications (<50 units), standard MWDM1L-9P-6K5-36P derivatives represent the optimal balance of cost and delivery. Design-for-producibility analysis should evaluate whether custom MWDM1L-9P-6K5-36P variants justify their lead-time and cost premium relative to employing standard configurations with external adapters or compliance components in the cable harness. Long-term programs expecting volume production should schedule custom MWDM1L-9P-6K5-36P tooling and qualification concurrently with system design to avoid schedule compression later.
  • How does the MWDM1L-9P-6K5-36P perform in high-vibration environments, and what mechanical design strategies minimize fatigue failures at the connector-to-cable interface? The MWDM1L-9P-6K5-36P withstands vibration amplitudes up to approximately 20 G (peak) across the 50–2000 Hz frequency range when properly mounted and strain-relieved; performance is validated per MIL-STD-810 or IEC 60068 methods applicable to the target application. Vibration-induced fatigue at the MWDM1L-9P-6K5-36P connector interface is primarily driven by differential motion between the connector body and the cable strain relief, particularly at resonant frequencies where mechanical impedance mismatch amplifies deflection. Fatigue failures manifest as intermittent electrical opens (fretting between stranded conductors and crimp contacts) rather than gross separation. Mitigation strategies include: securing the cable within 50–75 mm of the MWDM1L-9P-6K5-36P using cable clamps or conduit, ensuring the backshell cable entry diameter matches the cable jacket size to minimize radial bending moments, and routing the cable away from sharp panel edges or mounting bosses that create mechanical stress concentrators. Potted or molded strain relief boots bonded to the MWDM1L-9P-6K5-36P backshell and cable jacket significantly extend fatigue life by distributing bending strain over a longer physical distance.
  • *Part No. Manufacturer Target Price(USD) *Request Qty Action
    Add Item

    Enter Your Contact Information

    Submit
    MWDM1L-9P-6K5-36P StockMWDM1L-9P-6K5-36P PriceMWDM1L-9P-6K5-36P Electronics
    MWDM1L-9P-6K5-36P ComponentsMWDM1L-9P-6K5-36P InventoryMWDM1L-9P-6K5-36P Digikey
    Supplier MWDM1L-9P-6K5-36POrder MWDM1L-9P-6K5-36P Online Inquiry MWDM1L-9P-6K5-36P
    MWDM1L-9P-6K5-36P ImageMWDM1L-9P-6K5-36P PictureMWDM1L-9P-6K5-36P PDF
    MWDM1L-9P-6K5-36P DatasheetDownload MWDM1L-9P-6K5-36P DatasheetManufacturer
    Related parts for MWDM1L-9P-6K5-36P
    Image Part Number Description Manufacturer PDF Get a Quote
    MWDM1L-9P-6K5-36S1 MICRO D CONNECTOR Glenair  
    Get a Quote
    MWDM1L-9P-6K5-36B MICRO D CONNECTOR Glenair  
    Get a Quote
    MWDM1L-9P-6K5-36M MICRO D CONNECTOR Glenair  
    Get a Quote
    MWDM1L-9P-6K7-12B MICRO D CONNECTOR Glenair  
    Get a Quote
    MWDM1L-9P-6K5-36S MICRO D CONNECTOR Glenair  
    Get a Quote
    MWDM1L-9P-6K5-24B MICRO D CONNECTOR Glenair  
    Get a Quote
    MWDM1L-9P-6K5-20P MICRO D CONNECTOR Glenair  
    Get a Quote
    MWDM1L-9P-6K5-30S MICRO D CONNECTOR Glenair  
    Get a Quote
    MWDM1L-9P-6K7-12M MICRO D CONNECTOR Glenair  
    Get a Quote
    MWDM1L-9P-6K5-72B MICRO D CONNECTOR Glenair  
    Get a Quote
    MWDM1L-9P-6K7-11P MICRO D CONNECTOR Glenair  
    Get a Quote
    MWDM1L-9P-6K5-24M MICRO D CONNECTOR Glenair  
    Get a Quote
    MWDM1L-9P-6K5-6B MICRO D CONNECTOR Glenair  
    Get a Quote
    MWDM1L-9P-6K5-30S1 MICRO D CONNECTOR Glenair  
    Get a Quote
    MWDM1L-9P-6K5-18S MICRO D CONNECTOR Glenair  
    Get a Quote
    MWDM1L-9P-6K7-18B MICRO D CONNECTOR Glenair  
    Get a Quote
    MWDM1L-9P-6K5-18S1 MICRO D CONNECTOR Glenair  
    Get a Quote
    MWDM1L-9P-6K5-18P MICRO D CONNECTOR Glenair  
    Get a Quote
    MWDM1L-9P-6K7-12P MICRO D CONNECTOR Glenair  
    Get a Quote
    MWDM1L-9P-6K5-6S MICRO D CONNECTOR Glenair  
    Get a Quote

    News

    More
    onsemi Unveils EliteSiC M4 SiC Platform

    onsemi has launched EliteSiC M4, its fourth-generation silicon carbide (SiC) platform based on a trench architecture designed to improve next-generati...

    Arm and STMicroelectronics Advance Physical AI Through Cort...

    Building on decades of Arm Cortex-M innovation, Arm and STMicroelectronics are working together to bring intelligence closer to where machines interac...

    Renesas Debuts Flagship RX MCUs on 22 nm Process With Embed...

    Renesas Electronics introduced the RX74M and RX74N, two flagship 32-bit microcontrollers (MCUs) designed for industrial automation and energy infrastr...

    Omnivision Intros Image Sensor Duo Targeting Industrial and...

    Omnivision has expanded its industrial image sensor portfolio with the introduction of two backside-illuminated (BSI) global shutter CMOS sensors, the...

    Google is in talks with Marvell to develop two AI inference...

    On April 19, 2026 (local time), media reports citing sources familiar with the matter revealed that Google, a subsidiary of Alphabet, is in talks with...

    New Products

    More
    Texas Instruments TPS92542-Q1 Synchronous Boost Controller

    Texas Instruments TPS92542-Q1 Synchronous Boost Controller contains a synchronous boost controller and a two-channel monolithic synchronous buck LED d...

    Toshiba TB67H453 Single Channel H-Bridge Driver

    Toshiba TB67H453 Single Channel H-Bridge Driver has a current monitoring function with voltage feedback from the ISENSE output pin. The device's absol...

    STMicroelectronics STSAFE-A120 Authentication ICs

    STMicroelectronics STSAFE-A120 Authentication ICs are highly secure integrated circuits designed to protect sensitive data and devices through advance...

    STMicroelectronics STSAFE-A Optimized Authentication ICs

    STMicroelectronics STSAFE-A Optimized Authentication ICs leverage advanced cryptographic algorithms and key management techniques to protect sensitive...

    Diodes Incorporated PI3DPX1235Q 64 Crossbar Linear ReDriver

    Diodes Incorporated PI3DPX1235Q 6:4 Crossbar Linear ReDriver supports DP link-training transparent for source-side applications. The PI3DPX1235Q compl...

    Email: Info@ariat-tech.comHK TEL: +852 30501966ADD: Rm 2703 27F Ho King Comm Center 2-16,
    Fa Yuen St MongKok Kowloon, Hong Kong.