AMF-6F-15003000-30-8P
Part Number AMF-6F-15003000-30-8P
Manufacturer L3 Narda-MITEQ
Description IC RF AMP GPS 15GHZ-30GHZ MODULE
Quantity Available Request Stock & Quotation
Datasheets
AMF-6F-15003000-30-8P Price Request Price & Lead Time Online
or Email us: Info@ariat-tech.com
Technical Information of AMF-6F-15003000-30-8P
Manufacturer Part Number AMF-6F-15003000-30-8P Category RF and Wireless
Manufacturer MITEQ (Narda-MITEQ) Description IC RF AMP GPS 15GHZ-30GHZ MODULE
Package / Case Module Quantity Available Available Stock
Voltage - Supply 15V Test Frequency 15GHz ~ 30GHz
Supplier Device Package Module Series AMF
RF Type General Purpose Package / Case Module
Package Box P1dB 8dBm
Noise Figure 3dB Gain 40dB
Frequency 15GHz ~ 30GHz Current - Supply 200mA
Base Product Number AMF-6F  
AMF-6F-15003000-30-8P are New and Original in Stock, Find AMF-6F-15003000-30-8P electronics components stock, Datasheet, Inventory and Price at Ariat-Tech.com Online, Order AMF-6F-15003000-30-8P L3 Narda-MITEQ with warrantied and confidence from Ariat Technology Limitd. Ship via DHL/FedEx/UPS. Payment with Wire Transfer or PayPal is OK.
Email us: Info@Ariat-Tech.com or RFQ AMF-6F-15003000-30-8P Online.

Frequently Asked Questions

  • What are the gain flatness and frequency response characteristics of the AMF-6F-15003000-30-8P across its 15GHz to 30GHz operating band? The AMF-6F-15003000-30-8P delivers 40dB of gain across the 15GHz to 30GHz band, but gain flatness across this wide 15GHz span is a critical design consideration. Microwave amplifiers typically exhibit peaking or rolloff at band edges, particularly in broadband designs spanning octave or greater frequency ranges. The specification should be verified against the detailed frequency response curve to determine gain variation at specific frequencies of interest—for instance, whether the 40dB specification represents average gain, minimum gain, or gain at the test frequency. In receiver chains and measurement systems where gain consistency directly affects calibration accuracy, understanding actual flatness ±dB across the band prevents signal level errors that compound through cascaded stages.
  • How does the 3dB noise figure of the AMF-6F-15003000-30-8P affect system noise performance in low-signal detection applications? The AMF-6F-15003000-30-8P specifies a 3dB noise figure, which represents a 2× degradation in noise performance compared to an ideal noiseless amplifier. In systems where the AMF-6F-15003000-30-8P is the first gain stage, this noise figure directly establishes the system noise floor. For example, at 15GHz with 1GHz bandwidth, a 3dB noise figure translates to approximately -150dBm minimum detectable signal before amplification. In satellite communications, radar, or spectrum analysis applications operating near thermal noise limits, this noise performance is acceptable but not exceptional—designs requiring <2dB NF may require lower-noise alternatives or cryogenic front ends. The 3dB specification also assumes 50Ω source impedance; source mismatch or impedance discontinuities degrade effective noise figure, making input matching networks essential for optimizing AMF-6F-15003000-30-8P performance.
  • What does the 8dBm P1dB specification mean for signal handling and output saturation behavior of the AMF-6F-15003000-30-8P? The AMF-6F-15003000-30-8P exhibits a 1dB compression point at 8dBm output power, meaning that when the amplifier output reaches 8dBm, the gain compresses by 1dB from its small-signal specification. This indicates that the AMF-6F-15003000-30-8P is designed for small-signal amplification rather than power amplification; it will exhibit significant nonlinearity and efficiency loss when driven hard. In receiver architectures, the 8dBm P1dB establishes the maximum useful dynamic range before compression introduces amplitude distortion. If cascaded with subsequent gain stages or mixers, output levels above 8dBm will create intermodulation products and harmonic distortion. For intermediate frequency amplification in heterodyne receivers or sensitive measurement systems, the AMF-6F-15003000-30-8P output should be backed off 3–5dB from P1dB to maintain linearity, effectively limiting usable output to approximately 3–5dBm.
  • Is the AMF-6F-15003000-30-8P suitable for direct use in phased array antenna front-end amplification, and what impedance matching considerations apply? The AMF-6F-15003000-30-8P can function as a front-end low-noise amplifier in phased array systems, leveraging its 15GHz to 30GHz bandwidth and 40dB gain to provide element-level signal conditioning. However, phased array integration requires careful attention to input impedance matching and phase linearity. The AMF-6F-15003000-30-8P module specification does not typically guarantee phase linearity across the 15GHz span or phase stability across temperature variations—both critical for beam steering accuracy. Additionally, in active phased arrays where multiple AMF-6F-15003000-30-8P stages must be phase-synchronized, gain and noise figure matching between array elements becomes necessary. The module packaging and internal bias routing of the AMF-6F-15003000-30-8P may also present challenges for compact, tightly-spaced array geometries. System designers should verify phase response, element-to-element gain tolerance, and thermal management before committing the AMF-6F-15003000-30-8P to array-level integration.
  • How does the 15V supply voltage and 200mA current requirement of the AMF-6F-15003000-30-8P influence power distribution and thermal management in RF systems? The AMF-6F-15003000-30-8P requires 15V at 200mA, consuming 3W of DC power. In compact RF systems or airborne platforms with strict power budgets, this 3W dissipation can create significant thermal challenges. The module's output power of 8dBm P1dB indicates a typical power-added efficiency (PAE) around 10–20%, meaning most of the 3W input power is converted to heat rather than useful RF output. Thermal design must include adequate heatsinking, thermal interface material, and possibly forced convection cooling if the AMF-6F-15003000-30-8P is mounted in a thermally-constrained enclosure. Supply voltage stability is also critical; noise on the 15V rail couples into the amplifier output as phase and amplitude modulation. Designers should incorporate low-inductance bypass capacitors, ferrite chokes on supply lines, and possibly separate power distribution for the AMF-6F-15003000-30-8P to prevent supply ripple from degrading noise figure or introducing spurious signals.
  • What are the typical output impedance and return loss characteristics of the AMF-6F-15003000-30-8P, and how do they affect load matching and cascading? The AMF-6F-15003000-30-8P module output impedance and return loss across the 15GHz to 30GHz band are not always fully specified in component datasheets but are critical for system integration. Broadband RF amplifiers typically exhibit output return loss between 8–12dB across octave-scale frequency spans. Poor output match (return loss <8dB) causes energy reflection back into the amplifier, reducing effective gain, introducing phase distortion, and potentially causing instability if the load itself presents reactive impedance. When cascading multiple AMF-6F-15003000-30-8P stages or connecting to subsequent mixers, filters, or attenuators, a mismatched load can degrade the first stage's noise figure and compress gain. Designers should measure or request detailed S-parameter data for the AMF-6F-15003000-30-8P to verify output match across the operating band and insert impedance-matching networks or isolation stages if return loss is inadequate for the application.
  • What stability and potential oscillation risks exist when biasing and operating the AMF-6F-15003000-30-8P, particularly at band edges? The AMF-6F-15003000-30-8P spans 15GHz to 30GHz—a bandwidth ratio of 2:1. Broadband microwave amplifiers operating over such wide frequency ranges encounter stability challenges, particularly if input and output networks exhibit resonances or impedance discontinuities. At the lower edge (15GHz) and upper edge (30GHz), the AMF-6F-15003000-30-8P may exhibit different stability margins. Parasitic oscillations can occur if input and output return losses combine to create positive feedback loops at frequencies within or near the band. The module's bias circuit design and internal stability compensation affect susceptibility to oscillation. Users should verify oscillation-free operation across temperature extremes and with actual load impedances expected in the system, rather than assuming laboratory 50Ω conditions guarantee field stability. Input and output termination networks should include series resistance or ferrite damping if stability margins are marginal.
  • How does temperature variation affect the gain, noise figure, and output P1dB specifications of the AMF-6F-15003000-30-8P? The AMF-6F-15003000-30-8P specifications (40dB gain, 3dB NF, 8dBm P1dB) are typically measured at a reference temperature, usually 25°C. Semiconductor amplifiers experience gain changes of 0.01–0.03dB/°C and noise figure changes of approximately 0.01–0.02dB/°C depending on device design. Over a 50°C operating range (−10°C to +40°C), the AMF-6F-15003000-30-8P gain could vary by 0.5–1.5dB and noise figure by 0.5–1dB. The P1dB compression point also shifts with temperature; typical variation is −0.02 to −0.03dB/°C, meaning output power capability increases at lower temperatures and decreases at elevated temperatures. In systems requiring wide temperature operation (e.g., airborne, automotive, or outdoor installations), designers must account for these variations through automatic gain control, thermal compensation networks, or performance budgeting that ensures specifications are met across the entire operating temperature range rather than only at 25°C.
  • Can the AMF-6F-15003000-30-8P be directly replaced with lower-cost alternative amplifiers, and what performance trade-offs apply? Lower-cost alternatives to the AMF-6F-15003000-30-8P may include GaN or lower-generation GaAs amplifier modules with narrower frequency coverage (e.g., 12–18GHz or 24–32GHz focused bands) or slightly degraded noise figures (3.5–4.5dB). Substitution decisions depend on system requirements. If the application demands the full 15–30GHz bandwidth or requires the specific 3dB noise figure and 40dB gain combination, few direct equivalents exist at significantly lower cost. Narrowband alternatives may reduce cost by 20–40% but would require separate amplifier stages for different frequency bands, increasing component count and complexity. High-power GaN alternatives offering higher output power and efficiency exist but cost more and dissipate more heat, making them unsuitable for systems where the AMF-6F-15003000-30-8P's 8dBm output and 3W consumption are already constraints. Designers evaluating alternatives should verify frequency coverage, noise figure across the band, output saturation behavior, and thermal characteristics before committing to replacement.
  • What are the long-term reliability and end-of-life considerations for the AMF-6F-15003000-30-8P, and how do they affect system design longevity? The AMF-6F-15003000-30-8P is manufactured by L3 Narda-MITEQ, a well-established aerospace and defense supplier, and typically carries qualified reliability data and military/commercial pedigree. However, as a monolithic RF module, the AMF-6F-15003000-30-8P represents a single point of failure; component obsolescence or manufacturing discontinuation would require complete redesign if no identical replacement is available. REACH compliance status (Unaffected, per specification) indicates the device does not contain restricted substances, supporting long-term compliance and environmental standards. For systems expected to operate 10+ years, designers should evaluate whether the AMF-6F-15003000-30-8P technology node is likely to remain in production or whether migration to updated architectures (e.g., next-generation GaN or GaAs modules) should be planned. Procurement should include qualification of alternative suppliers or second sources where possible, and design margins should account for potential performance drift due to device aging (gain compression, noise figure degradation) across the intended lifetime.
  • What input and output connector types, impedance standards, and mechanical integration requirements does the AMF-6F-15003000-30-8P module typically feature? The AMF-6F-15003000-30-8P is specified as a module with 50Ω impedance standard, but detailed mechanical drawings, connector types (e.g., SMA, SMPM, WR-42 waveguide flanges), and PCB footprint information are essential for integration and are not fully detailed in the core parameter list. Microwave modules at this frequency range (15–30GHz) often employ connectorized packages (SMA female, SMPM female, or waveguide) or hybrid microstrip interconnects on custom carriers. The module housing, thermal interface, and electrical connection details directly affect integration complexity, cost, and system performance. PCB layout parasitic inductance and capacitance in the interconnect region between the AMF-6F-15003000-30-8P and surrounding components can introduce impedance discontinuities that degrade noise figure and gain flatness. Designers must obtain full mechanical and electrical datasheets to verify connector compatibility, lead inductance, mounting orientation, and thermal interface material specifications before committing to system-level PCB layout.
  • How does the AMF-6F-15003000-30-8P compare to discrete amplifier designs using individual transistors and passive networks? The AMF-6F-15003000-30-8P module offers integrated gain, bias stabilization, input/output matching, and temperature compensation in a single package, eliminating the design complexity and tuning time required for discrete implementations. A custom 40dB broadband amplifier covering 15–30GHz using discrete transistors would require careful impedance matching network design, feedback networks for stability, and extensive characterization across temperature and frequency. The AMF-6F-15003000-30-8P trades design flexibility and potential cost savings (at high volume) for rapid deployment and reduced board space. However, discrete designs can achieve superior gain flatness, lower noise figure, or higher output power at the cost of significant engineering effort. For single- or low-volume applications requiring 15–30GHz amplification, the AMF-6F-15003000-30-8P module approach is typically more cost-effective and reliable than discrete design; for very high-volume production (>50,000 units annually), custom discrete amplifiers may offer economic advantage despite higher development cost.
  • What measurement and characterization equipment is necessary to verify the AMF-6F-15003000-30-8P performance in laboratory or field acceptance testing? Comprehensive characterization of the AMF-6F-15003000-30-8P requires network analyzers (e.g., Keysight PNA series) with frequency coverage to 30GHz and dynamic range >100dB, noise figure analyzers capable of 1–30GHz operation, and power meters with mW-level sensitivity for P1dB measurements. A typical test setup for the AMF-6F-15003000-30-8P includes calibrated source impedance (50Ω), precision power supplies (±1% voltage regulation), and temperature chambers for thermal validation. Simplified acceptance testing might measure gain at three frequency points (15, 22.5, 30GHz), noise figure at mid-band, and saturation output power, reducing test time while confirming basic functionality. Full characterization including frequency response, return loss, stability under reactive loads, and temperature-dependent performance requires 2–4 hours per device. Field acceptance testing of installed AMF-6F-15003000-30-8P units may employ power meter and noise power ratio measurements if full network analyzer access is unavailable, providing rapid go/no-go verification.
  • What isolation and shielding techniques prevent RF coupling between multiple cascaded AMF-6F-15003000-30-8P stages or adjacent RF subsystems? Cascading multiple AMF-6F-15003000-30-8P stages or operating them in proximity to other RF sources creates risk of backward coupling, especially at frequencies where the AMF-6F-15003000-30-8P output impedance or transmission line paths exhibit resonances. Output power from the first AMF-6F-15003000-30-8P stage (8dBm max) can couple back into the input through PCB traces, creating oscillation or intermodulation products. Mitigation techniques include: (1) physical separation of AMF-6F-15003000-30-8P modules with shielded compartments or Faraday cages; (2) directional couplers or isolators between cascade stages to prevent reverse coupling; (3) careful PCB routing with ground planes below all RF traces connected to the AMF-6F-15003000-30-8P; (4) ferrite or resistive damping on input/output lines to suppress high-frequency oscillations; (5) bypassing supply and bias lines with ferrite beads to prevent common-mode coupling. Layout separation of >λ/2 (approximately 5mm at 15GHz) between AMF-6F-15003000-30-8P input and output connectors also reduces capacitive coupling.
  • *Part No. Manufacturer Target Price(USD) *Request Qty Action
    Add Item

    Enter Your Contact Information

    Submit
    AMF-6F-15003000-30-8P StockAMF-6F-15003000-30-8P PriceAMF-6F-15003000-30-8P Electronics
    AMF-6F-15003000-30-8P ComponentsAMF-6F-15003000-30-8P InventoryAMF-6F-15003000-30-8P Digikey
    Supplier AMF-6F-15003000-30-8POrder AMF-6F-15003000-30-8P Online Inquiry AMF-6F-15003000-30-8P
    AMF-6F-15003000-30-8P ImageAMF-6F-15003000-30-8P PictureAMF-6F-15003000-30-8P PDF
    AMF-6F-15003000-30-8P DatasheetDownload AMF-6F-15003000-30-8P DatasheetManufacturer MITEQ (Narda-MITEQ)
    Related parts for AMF-6F-15003000-30-8P
    Image Part Number Description Manufacturer PDF Get a Quote
    AMF-6F-14001550-25P AMPLIFIER L3 Narda-MITEQ  
    Get a Quote
    AMF-6F-15002100-16-21P-GW AMPLIFIER L3 Narda-MITEQ  
    Get a Quote
    AMF-6F-15501650-12-10P IC AMP GPS 15.5GHZ-16.5GHZ MOD L3 Narda-MITEQ  
    Get a Quote
    AMF-6F-14501550-35-10P IC AMP GPS 14.5GHZ-15.5GHZ MOD L3 Narda-MITEQ  
    Get a Quote
    AMF-6F-15003000-50-8P IC RF AMP GPS 15GHZ-30GHZ MODULE L3 Narda-MITEQ  
    Get a Quote
    AMF-6F-16001800-26P AMPLIFIER L3 Narda-MITEQ  
    Get a Quote
    AMF-6F-15501650-25-10P IC AMP GPS 15.5GHZ-16.5GHZ MOD L3 Narda-MITEQ  
    Get a Quote
    AMF-6F-14501550-25-10P IC AMP GPS 14.5GHZ-15.5GHZ MOD L3 Narda-MITEQ  
    Get a Quote
    AMF-6F-14501550-12-10P IC AMP GPS 14.5GHZ-15.5GHZ MOD L3 Narda-MITEQ  
    Get a Quote
    AMF-6F-14401540-12-15P AMPLIFIER L3 Narda-MITEQ  
    Get a Quote
    AMF-6F-16001800-30-26P-LPN AMPLIFIER L3 Narda-MITEQ  
    Get a Quote
    AMF-6F-15003000-40-8P IC RF AMP GPS 15GHZ-30GHZ MODULE L3 Narda-MITEQ  
    Get a Quote
    AMF-6F-14001600-15-15P AMPLIFIER L3 Narda-MITEQ  
    Get a Quote
    AMF-6F-16002600-25-10P-HS AMPLIFIER L3 Narda-MITEQ  
    Get a Quote
    AMF-6F-14501500-40-22P-TC AMPLIFIER L3 Narda-MITEQ  
    Get a Quote
    AMF-6F-16002600-25-10P IC RF AMP GPS 16GHZ-26GHZ MODULE L3 Narda-MITEQ  
    Get a Quote
    AMF-6F-15001800-23-10P-TC-APM AMPLIFIER L3 Narda-MITEQ  
    Get a Quote
    AMF-6F-16001800-30-26P AMPLIFIER L3 Narda-MITEQ  
    Get a Quote
    AMF-6F-14501550-12-10P-TC IC AMP GPS 14.5GHZ-15.5GHZ MOD L3 Narda-MITEQ  
    Get a Quote
    AMF-6F-15501650-35-10P IC AMP GPS 15.5GHZ-16.5GHZ MOD L3 Narda-MITEQ  
    Get a Quote

    News

    More
    Renesas Debuts Flagship RX MCUs on 22 nm Process With Embed...

    Renesas Electronics introduced the RX74M and RX74N, two flagship 32-bit microcontrollers (MCUs) designed for industrial automation and energy infrastr...

    Omnivision Intros Image Sensor Duo Targeting Industrial and...

    Omnivision has expanded its industrial image sensor portfolio with the introduction of two backside-illuminated (BSI) global shutter CMOS sensors, the...

    Google is in talks with Marvell to develop two AI inference...

    On April 19, 2026 (local time), media reports citing sources familiar with the matter revealed that Google, a subsidiary of Alphabet, is in talks with...

    TSMC Advances Panel-Level Packaging Technology; CoPoS Pilot...

    According to *The Business Times*, TSMC’s CoPoS (Chip-on-Panel-on-Substrate) pilot production line began delivering equipment to its R&D team in Febr...

    Anthropic Partners with Google and Broadcom to Deploy Sever...

    On April 6 local time, U.S. artificial intelligence (AI) technology giant Anthropic announced that it has signed a new agreement with Google and Broad...

    New Products

    More
    Texas Instruments TPS92542-Q1 Synchronous Boost Controller

    Texas Instruments TPS92542-Q1 Synchronous Boost Controller contains a synchronous boost controller and a two-channel monolithic synchronous buck LED d...

    Toshiba TB67H453 Single Channel H-Bridge Driver

    Toshiba TB67H453 Single Channel H-Bridge Driver has a current monitoring function with voltage feedback from the ISENSE output pin. The device's absol...

    STMicroelectronics STSAFE-A120 Authentication ICs

    STMicroelectronics STSAFE-A120 Authentication ICs are highly secure integrated circuits designed to protect sensitive data and devices through advance...

    STMicroelectronics STSAFE-A Optimized Authentication ICs

    STMicroelectronics STSAFE-A Optimized Authentication ICs leverage advanced cryptographic algorithms and key management techniques to protect sensitive...

    Diodes Incorporated PI3DPX1235Q 64 Crossbar Linear ReDriver

    Diodes Incorporated PI3DPX1235Q 6:4 Crossbar Linear ReDriver supports DP link-training transparent for source-side applications. The PI3DPX1235Q compl...

    Email: Info@ariat-tech.comHK TEL: +852 30501966ADD: Rm 2703 27F Ho King Comm Center 2-16,
    Fa Yuen St MongKok Kowloon, Hong Kong.